ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure that the resistance system can be assembled successfully by anyone. However, the resistance system has many parts and the assembly process will take time. By setting aside plenty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two persons.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
•As you assemble the exercise rack, make sure all parts are oriented as shown in the drawings.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
In addition to the included hex key(s) 
and grease, assembly may require the following tools (not included):
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
•Lubricant, such as grease or petroleum jelly, and soapy water
Assembly will be more convenient if you have a socket set, a set of
1. Press two Base Caps (62) onto the Base (1). | 1 |
|
|
| |
| 62 |
|
|
| 1 |
| 62 |
|
2. Attach a Wheel (60) to a Wheel Endcap (61) with | 2 |
|
an M6 Bolt Set (79). |
| |
|
| |
Attach the Wheel Endcap (61) to the Base (1) |
| 60 |
with two M4 x 20mm |
| 79 |
|
| |
Attach a Base Foot (68) to the Base (1) with an | 94 | 79 |
| ||
M4 x 20mm | 1 | 61 |
|
| |
Repeat this step for the other side of the Base |
| 94 |
(1). |
| 68 |
|
| |
| 94 |
|
6