NordicTrack NTS5925.0 user manual Wide End 109

5.Orient the Backrest (16) as shown. Attach the Backrest to the Upright Base (2) and the Upright

(3) with two M6 x 100mm Screws (71) and two M6 Washers (85).

6.Attach the Center Cover (59) to the Front Mech Cover (13) with two M4 x 20mm Self-tapping Screws (94).

7. Set the Mech Frame (10) on the Base (1).

Attach the Mech Frame (10) to the Upright Base

(2)with an M12 x 30mm Bolt (109). Do not tight- en the Bolt yet.

Tip the resistance system onto its side. Attach the Mech Frame (10) to the Base (1) with four M10 Nylon Locknuts (74).

Tighten the M12 x 30mm Bolt (109). Tighten the M10 Nylon Locknuts (74) used in step 3.

5
		71
		85
16		3
		71
Wide		85
		2
End
6
94
59
	13
94
7	10
		109
2	74
	1
	74

8