NordicTrack NTS5925.0 user manual Locknut the Dip Arm must be able to pivot easily

11.Grease an M10 x 217mm Bolt (73). Attach the Dip Arm (5) to the Upright (3) with the Bolt and an M10 Nylon Locknut (74). Do not overtighten the

Locknut; the Dip Arm must be able to pivot easily.

Attach the Pin (58) to the Upright (3) with an M4 x 20mm Self-tapping Screw (94). Insert the Pin into the Upright.

12.Wet the inside of the two Large Foam Pads (24) and the Dip Arm (5) with soapy water. Slide the two Large Foam Pads onto the Dip Arm.

Slide a Dip Arm Cap (65) onto a Dip Handle (11). Attach the Dip Handle and the Dip Arm Cap to the Dip Arm (5) with an M10 x 80mm Button Screw (77) and an M10 Washer (91).

Attach the other Dip Handle (11) and Dip Arm Cap (65) to the Dip Arm (5) in the same manner.

13.Attach the Seat (15) to the Seat Frame (6) with four M6 x 16mm Screws (72).

11
	3
	5
	74	73
	58	Grease
		94
12
	5
65	24
77	91
		24
	11
13
	15
	6
	72
	72

10