Life Fitness SM40 manual Assembly, Place the weight cube in its final resting spot

Page 4

SM40 Unpacking & Assembly Instructions

ASSEMBLY

Figure 2 shows an assembled SM40.

Figure 2. SM40 main components (seats and cables removed for clarity).

1.	Cube	5.	Tricep top
2.	Low row bench	6.	Adj. X-over top
3.	Lat bench	7.	150 lb. Weight stacks (2)
4.	Lat top	8.	300 lb. Weight stacks (2)

1. Place the weight cube in its final resting spot.

4

Image 4

Contents Stack MULTI-JUNGLE SM40 Unpacking and Assembly Instructions Materials and Tools Required for Assembly Assembly TimeParts box contents UnpackingAssembly Place the weight cube in its final resting spotConfiguration for 2-3/4 and 3 bolts Mount lat top V, tricep top U, adjustable crossover top Install the weight stacks. To do this Bolt the floating pulleys into the 190 lb weight stacks Mount the benches to the frame Bolt the benches to the frame Installing the Cables Removing the pulley boltsAdjustable Crossover Cable Routing Adjustable crossover cable routingAdjustable crossover cable end detail LOW ROW Cable RoutingScrew the cable into the weight stack LAT Pulldown Cable RoutingTricep Pushdown Cable Routing Tricep pushdown cable routingHardware . Assembly Parts HardwareHardware . Rubber caps Hardware . Cable jam nut Hardware . CablesHardware . Top assemblies Hardware . Weight stack rubber bumpers Hardware . Floating pulleyParts List Installed Hardware installedPulley hardware Floating pulley