Life Fitness SM40 manual Configuration for 2-3/4 and 3 bolts

Page 5

SM40 Unpacking & Assembly Instructions

Figure 3. Configuration for 2-3/4” and 3” bolts.

2.Bolt on the teardrop pulleys above the benches (see Figure 3) using four 3/8” x 2- 3/4” hex head bolts. Include the 3/8” flat washer, end cap washers, end caps and 3/8” Nyloc (locknut). Use the bolt configuration shown in the figure. You may wish to use a pinch bar to align the bolt holes.

3/8” x 2-3/4” (4)

Figure 4. Bolt on the two teardrop pulleys.

Image 5

Contents Stack MULTI-JUNGLE SM40 Unpacking and Assembly Instructions Assembly Time Materials and Tools Required for AssemblyUnpacking Parts box contentsPlace the weight cube in its final resting spot AssemblyConfiguration for 2-3/4 and 3 bolts Mount lat top V, tricep top U, adjustable crossover top Install the weight stacks. To do this Bolt the floating pulleys into the 190 lb weight stacks Mount the benches to the frame Bolt the benches to the frame Removing the pulley bolts Installing the CablesAdjustable crossover cable routing Adjustable Crossover Cable RoutingLOW ROW Cable Routing Adjustable crossover cable end detailLAT Pulldown Cable Routing Screw the cable into the weight stackTricep pushdown cable routing Tricep Pushdown Cable RoutingHardware Hardware . Assembly PartsHardware . Rubber caps Hardware . Cables Hardware . Cable jam nutHardware . Top assemblies Hardware . Floating pulley Hardware . Weight stack rubber bumpersParts List Hardware installed InstalledPulley hardware Floating pulley