960SROM1 9/22/06 1:34 PM Page 26
Workout Programs, continued
RANDOM PROGRAM
Getting Started
The Random program is designed to allow the user to choose from an unlimited num- ber of computer generated profiles.
Beginning the Program
During idle mode, the dot matrix window displays “DB”. To begin this program, press “Classic Program” key until “Random” program LED indicator lights up.
Accepting default values or Entering the program setup mode
When the dot matrix display shows Random program profile, it indicates you are about to select the Random program:
•Press “Start” key to accept current default values and begin Random program workout.
o Default Time = 30 minutes
o Default Level = a computer generated level profile with default difficulty level = L1.
•Or press “Enter” to enter program setup mode The dot matrix & data displays will take you through the program setup mode step by step as below: (same as Manual program setup)
o Entering Age
o Entering Weight o Entering Time
During the Program
As soon as the “Enter” or “Start” key is pressed, the Warm Up will be active. See Warm Up mode section for details.
Data Display
•When Warm Up mode is completed, the data display window will display the default workout data of “calories, speed & level”. Press “Select” button to switch the data displays to “watts, distance & RPM”.
•Time display will show the selected program time and count down.
•Pulse display will start displaying if there is a valid pulse.
Adjustment
•Press “Level Up/Down” key to adjust the difficulty level. The level data display will update the level and the dot matrix window will update the profile accordingly.
Ending the Program
•When selected program time is up or Stop key is pressed, this program will end and Cool down will be active. See Cool down section for details.
•There will be a beep sound to indicate the program ends.
Pause, Reset,
See Basic Operation section for details.
24 | 960 Sr Owner’s Manual |
|
|