ASSEMBLY - Console & Handlebar
BATTERY
FIGURE 8
Step 18. Remove BATTERY DOOR of CONSOLE
(40)and insert four "C" SIZE BATTERIES and replace BATTERY DOOR.
NOTE: DO NOT use rechargeable bat- teries. Using rechargeable batter- ies will cause a short circuit and
destroy CONSOLE (40).
FOUR "C" SIZE
BATTERIES
DOOR
IMPORTANT
Your monitor includes low grade batteries that will operate the computer for display purposes only. You will need to replace the batteries shortly after using the bike for the first few times.
FIGURE 8
40
CONSOLE
44
40
CONSOLE
EXTENSION
WIRE 
PULSE
WIRES
43
MACHINE
SCREW
BOOK
HOLDER
SLOT
Step 19.
PICKUP |
|
|
WIRE | 31 | Step 20. |
| M8 | |
|
|
4 | LOCKNUT | |
M8 | ||
PULSE | ||
WASHER | ||
GRIP | ||
|
42
MACHINE Step 21.
SCREW
41 | PULSE |
GRIP | |
FRONT | Step 22. |
HANDLEBAR
39
CONSOLE
TUBE
Step 23.
FIGURE 9
FIGURE 9
Insert PULSE WIRES from FRONT HANDLEBAR (41) through HOLE in CON- SOLE TUBE (39) and pull PULSE WIRES up through top of CONSOLE TUBE.
Attach FRONT HANDLEBAR (41), with PULSE GRIPS up, to CONSOLE TUBE
(39)with MACHINE SCREWS (42), M8 WASHERS (4), and M8 LOCKNUTS (31). NOTE: DO NOT pinch wires between
HANDLEBAR and CONSOLE TUBE.
Carefully plug PICKUP WIRE, EXTENSION WIRE and PULSE WIRES into bottom of CONSOLE (40).
Remove MACHINE SCREWS (43) from bottom of CONSOLE (40) and attach CON- SOLE to CONSOLE TUBE (39) with MA- CHINE SCREWS (43).
Snap BOOK HOLDER (44) into SLOT in CONSOLE (40).
9