Unwrap the lower board cable and remove any kinks. Feed the cable through the console bracket as shown in the illustration.
Lower the console bracket between the stabilizers and rest the base of the bracket against the two bottom flanges. Align the six mounting holes. Start with the side mounts and insert the four hex head screws (A), with four split washers (E), and four flat washers (B). Finger tighten.
Insert the two bottom hex head screws (A) with two split washers (E), and two flat washers (B). Finger tighten.
Use a Phillips screwdriver to remove the four screws that secure the back console plate to the display console. Set the fasteners and cover aside.
|
|
|
|
|
|
|
|
536i Elliptical Fitness CrossTrainer Assembly Guide | 9 | ||
