User ID Entry with CSAFE Equipment
The equipment is fully compatible with CSAFE protocols. When the equipment is connected to a CSAFE master device, the user is prompted to press ENTER and begin an identification process.
The user ID is displayed as five zeros and indicates the starting point. The following table describes key functions while in CSAFE mode.
Table 7. CSAFE access keys
Keypad | Description |
|
|
Number keypad | Use the number keys to enter a user ID. The number |
| that is pressed appears on the right. As the user |
| continues, the numbers fill in the display from right to |
| left. When all five numbers are in place, the user |
| must press ENTER or OK to submit the user ID. |
|
|
CLEAR or | Erases individual numbers in the user ID from right to |
BACK | left. |
|
|
ENTER or OK | Submits the user ID. |
| Note: User ID entry is bypassed when the user |
| enters five zeros. No workout statistics are recorded. |
|
|
RESET or | Resets the display to the banner. |
PAUSE/RESET |
|
|
|
Product Owner's Manual: Club Features
A message appears on the display and indicates when the user ID is accepted by the CSAFE master device. Once program selection is complete, the user can begin exercising.
To review information about CSAFE specifications, visit the web site at: www.fitlinxx.com/csafe
If you have questions or need technical support, refer to Obtaining Service.
30
