Precor EFX manual Keypads, Lower Display Keypad and the Selection Keys

Keypads

Use the keypads to enter program selections and display preferences.

Multiple keypads exist on the console display including a navigational keypad in the center of the display, and a PROGRAMS keypad.

Lower Display Keypad and the Selection Keys

Left selection key: Every time you press this key, the display reflects the amount of time elapsed since you began your exercise session, your time remaining, or your estimated number of calories burned. An LED lights and indicates which information is being displayed.

CROSSRAMP: Press and hold a CROSSRAMP key to increase or decrease the force applied against your stride from 1 to 20.

Ramp changes occur only when the foot pedals are in motion. The number that appears on the display indicates the selected CrossRamp setting, not the degree of incline. There is not a one-to-one relationship between the degree of incline and the percent of the CrossRamp grade setting which appears in the lower display. The setting affects the column height in the program profile. Refer to the figure in More Information about the Upper Display.

Changes to the ramp incline are not immediate. It takes time for the lift to reach the target incline shown on the display.

QUICKSTART: Press QUICKSTART to start your exercise session immediately using the Manual Program. Refer to Choosing QUICKSTART.

RESISTANCE: Press and hold a RESISTANCE key to increase or decrease the force applied against your stride from 1 to 20.

User's Reference Manual: Display Console 23