EFX: Cleaning the Ramp
Whenever the ramp becomes soiled, clean the exposed surfaces of the ramp and roller wheels by taking the following steps.
Note: If your equipment has a ramp cover, remove it before performing the following steps. Refer to the EFX Assembly Guide.
1.Moisten a clean, soft cloth in a mild solution of soap and water.
2.Position one foot pedal at the top of the ramp (the other will automatically be positioned at the bottom).
3.Clean the exposed portions of the ramp.
4.Gently lift the roller wheels. Rotate each wheel while wiping it with the clean, soft cloth.
5.Switch the foot pedal position and finish cleaning the ramp.
Product Owner's Manual: Maintenance
Storing the Chest Strap
If you purchased the optional heart rate chest strap, store it in a place where it remains free of dust and dirt (for example, in a closet or drawer). Be sure to protect the chest strap from extremes in temperature. Do not store it in a place that may be exposed to temperatures below 32° F (0° C).
To clean the chest strap, use a sponge or soft cloth dampened in mild soap and water. Dry the surface thoroughly with a clean towel.
WARNING Signals used by the Chest Strap Transmitter (or heart rate strap) may interfere with
pacemakers or other implanted devices. Consult your physician and the manufacturers of your Chest Strap Transmitter and implanted device before using a Chest Strap Transmitter.
Note: To receive an accurate reading, the strap needs to be in direct contact with the skin on the lower sternum (just below the bust line for women).
32
