Precor EFX manual Recumbent Bike Realigning the Seat, Loosening the two adjustment screws

Recumbent Bike: Realigning the Seat

If the seat rocks side-to-side, you need to realign the center wheel underneath the seat. Adjustment screws are located on the left side of the seat rail.

To remove seat wobble (side-to-side movement), take the following steps.

1.Obtain a ³⁄₁₆-inch and ⁵⁄₁₆-inch hex key.

2.Use the ³⁄₁₆-inch hex key to loosen the two adjustment screws as shown in the following figure.

Figure 7: Loosening the two adjustment screws

Product Owner's Manual: Maintenance

3.Use the ⁵⁄₁₆-inch hex key to turn the wheel lock adjustment key clockwise ¼ turn as shown in the following figure. This process realigns the center wheel inside the top rail. Leave the ⁵⁄₁₆-inch hex key in place while you tighten the adjustment screws with the ³⁄₁₆-inch hex key.

Figure 8: Realigning the center wheel

4.Remove the hex keys and check that the seat no longer rocks side-to-side. If the rocking movement continues, you need to repeat steps 2 and 3.

35