Selecting a U.S. Standard or Metric Display
The equipment can display measurements in either Metric or U.S. Standard. The default factory setting is U.S. Standard.
To change the display measurement:
1.At the S E L E C T U N I T S prompt, press OK.
Use the navigational arrow keys to select a unit of measure (U S or M E T R I C ).
CAUTION: If you change the Unit of Measure display on a treadmill, be sure to check the speed setting to verify that it is correct.
2.Press OK to accept the displayed setting and move to the next feature.
Setting a Workout Session Time Limit
You can limit how long a user can exercise on the equipment. For example, if you set the time limit to 20 minutes, users can only enter a session time between 1 and 20 minutes.
Note: The automatic cool down period is appended to the end of any
To set a maximum workout time:
1. At the S E T M A X W O R K O U T T I M E prompt, press OK. Use the navigational arrow keys to change the displayed time limit.
Note: When you press and hold a navigational arrow key, the number increments by five, for example, 1, 5, 10, 15, 20. When you tap an arrow key, the number increments by one.
2.When you have selected a maximum workout time, press OK to accept the displayed setting and move to the next feature.
You can also let a user exercise indefinitely by selecting N O L I M I T . If you choose the N O L I M I T setting, you will need to provide the following instructions to your users.
To exercise without a time limit:
1.Select a program. The workout time appears in the display.
2.On the number keypad, type 240.
3. Press the UP arrow key to display N O L I M I T , and press OK.
The exercise session times available are between 1 and 240 minutes.
Product Owner's Manual: Club Features | 22 |
