![](/images/new-backgrounds/1302725/302725191x1.webp)
Treadmill: Adjusting the Running Belt
If you are unsure about adjusting the running belt, call Precor Customer Support (refer to Obtaining Service).
CAUTION: For your safety, use the power switch to turn Off the treadmill before making any adjustments. Do not adjust the running belt when someone is standing on the equipment.
1.Locate the right belt adjustment bolt in the rear end cap of the treadmill as shown in the following figure.
To determine left and right, stand at the rear of the treadmill and face the display. Make all belt adjustments on the right rear corner bolt using the hex key provided.
If the belt is off center to the LEFT, turn the adjusting bolt ¼ turn counterclockwise, which moves the running belt to the right.
If the belt tracks off center to the RIGHT, turn the bolt ¼ turn clockwise; this moves the belt to the left.
Important: Do not turn the adjusting bolt more than ¼ turn at a time. Overtightening the bolt can damage the treadmill.
2.Recheck the alignment of the running belt by repeating the steps found in Treadmill: Checking the Alignment of the Running Belt.
Figure 6: Location of the adjustment bolt
Product Owner's Manual: Maintenance | 34 |