Assembly and Setup, Unpacking and Assembly | Star Trac E-ST instruction

ASSEMBLY AND SETUP

The following parts are included with the STAR TRAC E-ST STEPPER:

■E-ST STEPPER Base frame assembly

■Display Assembly

■Left and right side handrails (Note: Both handrails are the same)

■Hardware Kit 711-3182 includes:

8 handrail screws PN 110-0506

4 neck screws PN 110-3172 5/32” Hex key PN 290-0040

■Owners Manual

■Warranty Card

UNPACKING AND ASSEMBLY

NOTE: Inspect the shipping carton for any parts that may be missing BEFORE discarding the carton. Items can shift during trans- portation, and may be accidentally discarded with the carton. If any parts are missing, please contact Star Trac Support at 800-503- 1221. Have the serial number of the Stepper, and the part number(s) of the missing parts ready so they may be shipped to you.

1. Unpack the Shipping Carton

Open the top of the Stepper Box, remove the handrail box (long, thin box at outside edge) place aside. Remove Display assembly and place aside. Remove remaining packing material, and carefully remove from pallet base.

2. Open Display

M4 x 0.7

Screws

Remove (2) M4 x 0.7 screws from back of display (retain for later use) with a #2 Phillips screwdriver and separate the back of the dis- play from the front.

STAR TRAC E-ST STEPPER OWNER’S MANUAL