Trixter X-Bike manual Performance, Adjustability

o4-bolt clamp handlebar clamp to provide a very secure bar fitment. o Boxer Bar ends

o Handlebar Grips – Hi grip rubber compound.

o Non-corrosive hardware fitted throughout mechanism to prevent corrosion.

Performance

oTrue Cycle Geometry provided by the unique trapezoidal movement about a

virtual cycling pivot point.

oOptimum low impact total body workout for the most efficient combined cross

training to be found on an indoor cycle.

oAdjustable Hydraulic X-Bars™ Damper resistance to enhance various levels of upper body exercise.

oX-Bars™ ‘Return to Zero’ system providing up to 170lb (780N) pulling force in the mechanism to centralise the bars for regular spinning.

oBoxer Bar Ends which provide alternative upper body muscle group workouts and also provide a wrist rest for added rider comfort.

oHigh inertia drive system comprised of the 40lb (18.2kg) flywheel and direct drive gearing to simulate closely the feel of road riding. The sidewall resistance surface of the flywheel is machined to a perfectly even finish. Each wheel is

finely balanced through a carefully programmed drilling operation to remove small quantities of distributed weight. The flywheel assembly is completed by fitting a high quality bearing.

oThe transmission system is built to pro road bike standards. TH Power Pro 9900st Bottom Bracket with ISIS spline drive, hollow, chrome molly steel spindle and sealed cartridge bearings. Standard 68mm bottom bracket width, 110 mm spindle length. The ISIS spline crank arm mounting system is superior to square tapered spindles because it is stronger, less likely to squeak or come lose and makes crank

arm removal and installation faster and easier.

o3” x 1” (75mm x 25mm) felt pads to provide smooth pedal action and evenly

distributed resistance.

oKMC S10 Stainless Steel chain (½ x 1/8” – 116 links) for low maintenance. o Shimano SF-MX30 ½ x1/8, 16T freewheel and 52 tooth steel chain ring for

added life.

o VP D68 aluminium alloy two sided pedals with chrome molly axles allowing a choice of SPD clip- less or half- toe clip.

Adjustability

oFully indexed Grip-Shift™providing a very efficient and easy to control adjustment to the flywheel resistance system for lower body elements.

oFully adjustable X-Bars™ Damper Resistance System for upper body elements. o A five-way, fully adjustable Rider Compartment accommodates users of nearly any size. Easily accessible and large one-hand quick release levers to make most

the quick and easy adjustments.

o A self-aligning handlebar stem adjusts vertically up to 5” (130mm) with laser etched reference numbers on the handlebar stem aid when resetting your position.

o Quick release Saddle Reach adjustment up to 3.5” (90mm) via an extremely rigid extruded aluminium track and guide. Laser etched reference numbers on the sliding saddle base help you set your favorite position.

o Quick release Saddle Height adjustment laser etched “Indexed” seat positioning. An extra long, self- aligning seat post adjusts 15.75” (400 mm) to accommodate

32