JVC CA-NXHD10R manual Recording the External Component, Start playback on the external equipment

Page 55

Continued

To change the information shown in the main display while recording

Each time you press DISP/CHARA on the remote control,

the information in the main display changes as follows:

1

2

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35

Clock

1Preset station number if any

2 Station frequency

3 Remaining recording time in the HDD, calculated based on the current setting of the recording mode

4 Album number and its track number recorded

5 Recording mode in use

Recording the External Component

You can start recording automatically when the source sound comes into this unit through the LINE IN jacks —Sound Synchronized Recording.

Sound Synchronized Recording will stop automatically if no sound comes in for more than 30 seconds (after making a 30-second silence recording).

This unit is equipped with the following recording modes to record from the external component.

•AAC128kbps : AAC format is used at the bit rate of 128 kbps.

•AAC 96kbps : AAC format is used at the bit rate of 96 kbps.

1 Press TUNER/LINE repeatedly to select the external component (see page 25).

2 Press REC MODE on the unit repeatedly to select the recording mode.

Current recording

AAC 128

mode setting

 

Ex. When selecting “AAC128kbps”

•Each time you press the button, the recording modes change as follows:

AAC128kbps AAC 96kbps

The indicator corresponding to the selected recording mode lights up on the display.

3 Press REC START.

The REC indicator starts flashing on the display, and the unit now stands by for Sound Synchronized Recording.

REC

REC

indicator

AAC 128

 

Remaining recording time in the HDD*

*Remaining recording time is calculated based on the current setting of the recording mode.

•If playback has already started on the external component, the unit will start recording without entering recording standby mode.

4 Start playback on the external equipment.

Recording starts, and the REC indicator stops flashing and remains lit.

• You can also start recording by pressing HDD 3/8.

5 When playback ends, press 7 to stop recording.

The REC indicator goes off, and the following message appears in the main display.

6 Press LIBRARY to select a library where you store the recording just done.

•Each time you press LIBRARY, the library changes— “Library 1” to “Library 10.”

•If you do not select any library within one minute, “Library 1” is automatically selected.

– 50 –

Page 54 Page 56
Image 55
Page 54 Page 56
Contents LVT0859-004A CA-NXHD10RIf in Doubt Consult a Competent Electrician Class Laser Product Side view Front viewTo keep the continuity of the recorded sounds Introduction PrecautionsContents Become familiar with the buttons on your unit Location of the ButtonsFront Panel Inside of Front Door Display WindowTo close the door How to open the front doorFront Panel Display WindowWhen using the remote control Remote ControlFM antenna Connecting AntennasGetting Started UnpackingTo connect an outdoor AM MW/LW antenna Connecting SpeakersYou can connect the speakers using the speaker cords AM MW/LW antennaSpeaker grilles are removable as shown below Connecting Other EquipmentEx. When connecting a cassette deck To remove the speaker grilleConnecting a keyboard Putting the Batteries into the Remote ControlRemote control Basic SettingsFront panel Setting the Clock Turning On the PowerTo turn on/off the clock indication To adjust the clock againChanging the Display Brightness Changing the Display ContrastBasic and Common Operations To select the CD player as the source, press CD 3/8 Adjusting the VolumeSelecting the Sources and Starting Play LineReinforcing the Bass Sound Adjusting the Bass and Treble SoundsAHB 1 AHB AHB OFF canceled Source indication canceledHall MID Night Head Phones Using the AAC SoundsAAC Sound OFF Mono Film canceled What is AAC?Listening to FM and AM MW/LW Broadcasts To change the information shown in the main display Tuning in to a StationTo change the FM reception mode FM AM LineTuning in to a Preset Station Presetting StationsTo record a broadcast program automatically PTY Receiving FM Stations with RDSChanging the RDS Information Searching for Programs by PTY Codes PTY SearchSwitching to a Program Type of Your Choice Temporarily Test function Alarm functionMore about the Enhanced Other Networks function Description of the PTY codes Playing Back the External Component Selecting the External Component Adjusting the Input LevelFM AM Selected source name appears in the main display To cancel the setting, press CancelChanging the Source Name Press SET to finish changing the source namePqrs TUV Wxyz Playing Back CDs CD/CD-R/CD-RWPlaying Back the Entire CD-Normal Play Precautions on CD PlaybackTo stop playback for a moment To go to another track directly using the number buttonsBasic CD Operations Programing the Playing Order of the Tracks -Program PlayPlaying at Random-Random Play To check the program contentsTo modify the program Repeat OFF Repeating Tracks or CD-Repeat PlayProhibiting Disc Ejection-Disc Lock Repeat 1TRKMark Playing Back the HDD Hard Disk DrivePress HDD 3/8 Playing Back the Entire HDD Continuous PlayHow tracks are recorded into the HDD LibrariesTo locate a particular point in a track during play Basic HDD OperationsHDD Album HDD Library Playing Tracks in an Album-Album PlayTo select another album To select another libraryAlbum or Album repeatedly Library indicator lights up on the displayTo go to another track in the same album, press ¢ or To go to another album in the same library, pressAll tracks in the HDD are played repeatedly and endlessly Random and indicators light up on the displayYou cannot cancel Repeat play during Random play Repeating Tracks-Repeat PlayTrack T.? Canceled Last 10? Track title?Searching for Albums and Tracks to Play- Search Modes Album T.?Canceled Last 10? For Album Title Search Available symbols are as followsRepeat steps 4 1 and4 2 to enter other characters Press EnterPlayed or recorded-LAST To search for one of the last 10 albums recentlyAlbum No.? Recording into the HDD About the maximum recording length for one track Before You Start RecordingAbout the digital formats used for recordings How the HDD separates the recorded tracks?Press Select ¢ or Select 4to select ON? Press SET Using Automatic Recording FunctionsCanceled TU Auto REC Smart COMP. CD Auto RECTo automatically record CDs-CD Auto Recording CD and Auto indicators light up on the displayCD and Auto indicators go off CD Auto Recording will be automatically canceled ifHow Tuner Auto Recording actually works? CanceledSmart Comp CD Auto REC TU Auto RECPrepare a CD Press REC Mode on the unit to select the recording modeRecording CDs AAC128kbps AAC 96kbps PCM x1 REC PCM x4 REC PCM x2 RECTo stop while recording, press To record a single track during playbackPress SET to finish the recording Entry flashes in the main display for a whileTo assign track numbers manually while recording When the broadcast program ends, press 7 to stop recordingRecording FM/AM MW/LW Broadcasts AAC128kbps AAC 96kbpsRecording the External Component When playback ends, press 7 to stop recordingStart playback on the external equipment To assign track numbers manually while recording To record CD into the HDD using analog recording modeWhen no sound comes in for more than 30 seconds To cancel analog recording, press REC Start againMark 2-ABC 3-DEF GHI 5-JKL 6-MNO Pqrs 8-TUV 9-WXYZ Making Your Own TitlesTITLE? LIB. EDIT? Album EDIT? Canceled Track EDIT?Assigning Titles to Albums and Tracks To assign a title to an albumAssign the title by referring on Press Enter Press TITLE/EDIT again to exit from the title entry modeOn the remote control only Press HDD 3/8 To assign titles to tracksMark 2-ABC 3-DEF GHI 5-JKL 6-MNO Pqrs 8-TUV 9-WXYZ Editing the HDDTrack Editing Introducing HDD Editing FunctionsLibrary Editing Album EditingPress SET Press SET again Unit enters the library name entry modeLibrary name entry screen appears in the main display Press SET Press Enter Restoring the Libraries-RESTORECopying an Album-COPY Album Press Select ¢ or Select 4to selectPress Select ¢ or Select 4 to select Moving an Album-LIB. ChangeMaking a New Album-MAKE Album Confirmation screen appears in the main displayTo make your best album later Erasing an Album-ERASEPress Select ¢ or Select 4to select ERASE?, then press SET Copying a Track-COPY Track Erasing All Albums-ALL ErasePress Enter again Playback continues Press SET when you find the start point POSI.A for CopyAlbum selection screen appears Currently selected track starts playingPress Select ¢ or Select 4to select MOVE?, then press SET Moving a Track-MOVEPlayback stops, and the library selection screen appears 11Press EnterPress Select ¢ or Select 4to select DIVIDE?, then press SET Dividing a Track-DIVIDEIf Cannot Entry LIB. appears in the main display To join the divided tracks, see the Join function that Press SET when you find the dividing pointJoining Tracks-JOIN Playback stopsIf Cannot Join appears in the main display Erasing a Track-ERASE TRKPress Select ¢ or Select 4to select tracks To divide the joined tracks, see the Divide function onOff /TIMER Sleep Using the TimersHow Recording Timer actually works Using Recording TimerFor each recording mode, see Recording source setting screen appearsFM? AM? LINE? Minute digit starts flashingLINE?* HDD? Using Daily TimerHow Daily Timer actually works FM? AM? CD?120 Using Sleep TimerHow Sleep Timer actually works To turn on the Daily Timer, repeat , and press SET in stepTo deactivate Auto Power Off, press A.P.off Using Auto Power OffTimer Priority To sleep with Sleep Timer and wake up with Daily TimerKeys Used for Operating This Unit Using an Optional KeyboardTo assign an album title-F1 Operating Procedures Using the KeyboardTo assign a track title-F2 To search for a track by entering its title-F7 To change a library name-F3To search for an album by entering its title-F6 To search for an album by its number-F5Handling CDs MaintenanceCleaning the unit General NotesMessages Signification SolutionMessage Cannot How to rebuild the HDDSignification Action TroubleshootingCD playback Symptom Possible CauseHDD recording HDD editing Symptom Possible Cause ActionIf Level OVER! appears in the main display General Possible Cause ActionSpecifications Above ALL SP-NXHD10 Connection Remarque AnschlussNota AansluitingenCollegamento Tilslutning

CA-NXHD10R specifications

The JVC CA-NXHD10R is a compact, versatile audio system designed to deliver high-quality sound in a sleek, modern package. This system stands out with its unique combination of features, tools, and technologies that cater to both casual listeners and audiophiles alike.

One of the main features of the CA-NXHD10R is its powerful 2-way speaker system, which produces rich and clear audio across a wide frequency range. This ensures that users can enjoy their favorite music genres, from classical to rock, with the fidelity they deserve. The system is complemented by an integrated amplifier that delivers a robust output, making it suitable for home use as well as small gatherings.

The CA-NXHD10R boasts a built-in CD player, allowing users to enjoy their CD collections without the need for additional equipment. Additionally, the system is equipped with a USB port, providing an easy way to connect USB devices and play music directly from flash drives. The inclusion of Bluetooth technology adds a contemporary touch, enabling wireless streaming from smartphones and tablets. This makes it incredibly convenient for users to access a vast library of music from popular streaming services.

For those who appreciate radio, the JVC CA-NXHD10R features an FM/AM tuner with preset station memory, allowing easy access to favorite radio channels. The system is designed with user-friendly controls, including a remote control for added convenience. The clear LCD display ensures visibility, even in low-light conditions.

In terms of design, the CA-NXHD10R is compact yet stylish, fitting seamlessly into various interior spaces. Its elegant finish and modern aesthetics make it an attractive addition to any room.

Sound customization is another highlight, with built-in equalizer settings that allow users to adjust audio to their liking. Whether it’s boosting bass or enhancing treble, this feature caters to individual preferences, ensuring a personalized listening experience.

The JVC CA-NXHD10R is designed with durability in mind, providing a reliable audio solution that withstands the test of time. Its combination of diverse input options, powerful sound delivery, and user-friendly features makes it a well-rounded choice for anyone looking to elevate their audio experience. Overall, the CA-NXHD10R is an excellent option for those seeking a high-performance, aesthetically pleasing sound system.
Top Page Image Contents