JVC CA-NXHD10R manual Using Sleep Timer, How Sleep Timer actually works, 120

Page 76

6 Press SELECT ¢ or SELECT 4 to adjust the volume level, then press SET.

•You can adjust the volume level within the range of 0 (silent) to 50 (maximum).

•When you select “VOL. – –” (selectable only with the unit turned on), the volume is set to the current level.

7 Press SELECT ¢ or SELECT 4 to select “FADE” or “NoFADE”, then press SET.

FADE : Volume fades in (gradually becomes louder and is set to the specified level).

NoFADE : No fade-in effect. Volume is set to the specified level when the timer on-time comes.

The DAILY indicator stops flashing and remains lit on the display.

The contents of this setting appear in sequence.

8 Press STANDBY/ON to turn off the unit.

To turn off the Daily Timer after its setting is done

1Press CLOCK/TIMER three times.

The Daily Timer ON/OFF setting screen appears in the main display.

2Press CANCEL.

The Daily Timer will be turned “OFF,” and the DAILY indicator goes off from the display.

To turn on the Daily Timer, repeat step 1, and press SET in step 2.

The DAILY indicator lights up on the display. The settings you have stored are shown in the main display for your confirmation.

•“DAILY TIMER NO SET” appears and “SET DAILY!” flashes in the main display before you enter the timer settings.

If the unit is turned on when the timer on-time comes

Daily Timer does not work at all.

If you change the source or turn off the unit while Daily Timer is working

Daily Timer is canceled temporarily.

If you press CLOCK/TIMER, SLEEP, or TITLE/EDIT

during timer recording

Daily Timer is canceled temporarily, and the unit will not turn off when the timer off-time comes.

Using Sleep Timer

With Sleep Timer, you can fall asleep to your favorite music.

You can set Sleep Timer when the unit is turned on.

How Sleep Timer actually works

The unit automatically turns off after the specified time length passes.

On the remote control ONLY:

Press SLEEP until the shut-off time you want appears.

The SLEEP indicator lights up on the display.

The HDD lamp and the VOLUME lamp on the front panel also go off.

“SLEEP” and sleep time appear in the main display.

AAC 128

SLEEP SLEEP

indicator

• Each time you press the button, the time length changes

as follows:

 

 

 

10

20

30

60

OFF

 

120

90

(Canceled)

 

 

 

• If the built-in clock has not been set, “CLOCK

ADJUST!” will flash for a while.

 

The display dims when the sleep timer starts working.

To check the remaining time until the shut-off time,

press SLEEP once. The remaining time until the shut-off time appears in the main display for about 5 seconds.

To change the shut-off time, press SLEEP repeatedly until the time length you want appears.

To cancel the setting, press SLEEP repeatedly until “SLEEP OFF” appears in the main display.

Sleep Timer will be also canceled in the following cases:

•When the unit is turned off,

•When Recording timer is operated, and

•When the clock or any other timer is readjusted.

– 71 –

Page 75 Page 77
Image 76
Page 75 Page 77
Contents CA-NXHD10R LVT0859-004AIf in Doubt Consult a Competent Electrician Class Laser Product Front view Side viewTo keep the continuity of the recorded sounds Precautions IntroductionContents Location of the Buttons Front PanelInside of Front Door Display Window Become familiar with the buttons on your unitHow to open the front door Front PanelDisplay Window To close the doorRemote Control When using the remote controlConnecting Antennas Getting StartedUnpacking FM antennaConnecting Speakers You can connect the speakers using the speaker cordsAM MW/LW antenna To connect an outdoor AM MW/LW antennaConnecting Other Equipment Ex. When connecting a cassette deckTo remove the speaker grille Speaker grilles are removable as shown belowPutting the Batteries into the Remote Control Connecting a keyboardRemote control Basic SettingsFront panel Turning On the Power Setting the ClockTo adjust the clock again Changing the Display BrightnessChanging the Display Contrast To turn on/off the clock indicationBasic and Common Operations Adjusting the Volume Selecting the Sources and Starting PlayLine To select the CD player as the source, press CD 3/8Adjusting the Bass and Treble Sounds AHB 1 AHB AHB OFF canceledSource indication canceled Reinforcing the Bass SoundUsing the AAC Sounds AAC Sound OFF Mono Film canceledWhat is AAC? Hall MID Night Head PhonesListening to FM and AM MW/LW Broadcasts Tuning in to a Station To change the FM reception modeFM AM Line To change the information shown in the main displayTuning in to a Preset Station Presetting StationsTo record a broadcast program automatically Receiving FM Stations with RDS Changing the RDS InformationSearching for Programs by PTY Codes PTY Search PTYSwitching to a Program Type of Your Choice Temporarily Test function Alarm functionMore about the Enhanced Other Networks function Description of the PTY codes Playing Back the External Component Selecting the External Component Adjusting the Input LevelFM AM To cancel the setting, press Cancel Changing the Source NamePress SET to finish changing the source name Selected source name appears in the main displayPlaying Back CDs CD/CD-R/CD-RW Pqrs TUV WxyzPrecautions on CD Playback Playing Back the Entire CD-Normal PlayTo go to another track directly using the number buttons Basic CD OperationsPrograming the Playing Order of the Tracks -Program Play To stop playback for a momentPlaying at Random-Random Play To check the program contentsTo modify the program Repeating Tracks or CD-Repeat Play Prohibiting Disc Ejection-Disc LockRepeat 1TRK Repeat OFFPlaying Back the HDD Hard Disk Drive MarkPlaying Back the Entire HDD Continuous Play How tracks are recorded into the HDDLibraries Press HDD 3/8Basic HDD Operations To locate a particular point in a track during playPlaying Tracks in an Album-Album Play To select another albumTo select another library HDD Album HDD LibraryLibrary indicator lights up on the display To go to another track in the same album, press ¢ orTo go to another album in the same library, press Album or Album repeatedlyRandom and indicators light up on the display You cannot cancel Repeat play during Random playRepeating Tracks-Repeat Play All tracks in the HDD are played repeatedly and endlesslyCanceled Last 10? Track title? Searching for Albums and Tracks to Play- Search ModesAlbum T.? Track T.?Canceled Last 10? Available symbols are as follows Repeat steps 4 1 and4 2 to enter other charactersPress Enter For Album Title SearchPlayed or recorded-LAST To search for one of the last 10 albums recentlyAlbum No.? Recording into the HDD Before You Start Recording About the digital formats used for recordingsHow the HDD separates the recorded tracks? About the maximum recording length for one trackUsing Automatic Recording Functions Canceled TU Auto RECSmart COMP. CD Auto REC Press Select ¢ or Select 4to select ON? Press SETCD and Auto indicators light up on the display CD and Auto indicators go offCD Auto Recording will be automatically canceled if To automatically record CDs-CD Auto RecordingCanceled Smart Comp CD Auto RECTU Auto REC How Tuner Auto Recording actually works?Press REC Mode on the unit to select the recording mode Recording CDsAAC128kbps AAC 96kbps PCM x1 REC PCM x4 REC PCM x2 REC Prepare a CDTo record a single track during playback Press SET to finish the recordingEntry flashes in the main display for a while To stop while recording, pressWhen the broadcast program ends, press 7 to stop recording Recording FM/AM MW/LW BroadcastsAAC128kbps AAC 96kbps To assign track numbers manually while recordingRecording the External Component When playback ends, press 7 to stop recordingStart playback on the external equipment To record CD into the HDD using analog recording mode When no sound comes in for more than 30 secondsTo cancel analog recording, press REC Start again To assign track numbers manually while recordingMaking Your Own Titles Mark 2-ABC 3-DEF GHI 5-JKL 6-MNO Pqrs 8-TUV 9-WXYZCanceled Track EDIT? Assigning Titles to Albums and TracksTo assign a title to an album TITLE? LIB. EDIT? Album EDIT?Press TITLE/EDIT again to exit from the title entry mode On the remote control only Press HDD 3/8To assign titles to tracks Assign the title by referring on Press EnterEditing the HDD Mark 2-ABC 3-DEF GHI 5-JKL 6-MNO Pqrs 8-TUV 9-WXYZIntroducing HDD Editing Functions Library EditingAlbum Editing Track EditingPress SET Press SET again Unit enters the library name entry modeLibrary name entry screen appears in the main display Restoring the Libraries-RESTORE Copying an Album-COPY AlbumPress Select ¢ or Select 4to select Press SET Press EnterMoving an Album-LIB. Change Making a New Album-MAKE AlbumConfirmation screen appears in the main display Press Select ¢ or Select 4 to selectTo make your best album later Erasing an Album-ERASEPress Select ¢ or Select 4to select ERASE?, then press SET Copying a Track-COPY Track Erasing All Albums-ALL ErasePress Enter again Press SET when you find the start point POSI.A for Copy Album selection screen appearsCurrently selected track starts playing Playback continuesMoving a Track-MOVE Playback stops, and the library selection screen appears11Press Enter Press Select ¢ or Select 4to select MOVE?, then press SETPress Select ¢ or Select 4to select DIVIDE?, then press SET Dividing a Track-DIVIDEIf Cannot Entry LIB. appears in the main display Press SET when you find the dividing point Joining Tracks-JOINPlayback stops To join the divided tracks, see the Join function thatErasing a Track-ERASE TRK Press Select ¢ or Select 4to select tracksTo divide the joined tracks, see the Divide function on If Cannot Join appears in the main displayUsing the Timers Off /TIMER SleepUsing Recording Timer How Recording Timer actually worksRecording source setting screen appears FM? AM? LINE?Minute digit starts flashing For each recording mode, seeUsing Daily Timer How Daily Timer actually worksFM? AM? CD? LINE?* HDD?Using Sleep Timer How Sleep Timer actually worksTo turn on the Daily Timer, repeat , and press SET in step 120Using Auto Power Off Timer PriorityTo sleep with Sleep Timer and wake up with Daily Timer To deactivate Auto Power Off, press A.P.offUsing an Optional Keyboard Keys Used for Operating This UnitTo assign an album title-F1 Operating Procedures Using the KeyboardTo assign a track title-F2 To change a library name-F3 To search for an album by entering its title-F6To search for an album by its number-F5 To search for a track by entering its title-F7Maintenance Cleaning the unitGeneral Notes Handling CDsMessages Signification SolutionMessage Cannot How to rebuild the HDDSignification Troubleshooting CD playback SymptomPossible Cause ActionHDD recording HDD editing Symptom Possible Cause ActionIf Level OVER! appears in the main display Possible Cause Action GeneralSpecifications Above ALL SP-NXHD10 Connection Anschluss RemarqueAansluitingen NotaCollegamento Tilslutning

CA-NXHD10R specifications

The JVC CA-NXHD10R is a compact, versatile audio system designed to deliver high-quality sound in a sleek, modern package. This system stands out with its unique combination of features, tools, and technologies that cater to both casual listeners and audiophiles alike.

One of the main features of the CA-NXHD10R is its powerful 2-way speaker system, which produces rich and clear audio across a wide frequency range. This ensures that users can enjoy their favorite music genres, from classical to rock, with the fidelity they deserve. The system is complemented by an integrated amplifier that delivers a robust output, making it suitable for home use as well as small gatherings.

The CA-NXHD10R boasts a built-in CD player, allowing users to enjoy their CD collections without the need for additional equipment. Additionally, the system is equipped with a USB port, providing an easy way to connect USB devices and play music directly from flash drives. The inclusion of Bluetooth technology adds a contemporary touch, enabling wireless streaming from smartphones and tablets. This makes it incredibly convenient for users to access a vast library of music from popular streaming services.

For those who appreciate radio, the JVC CA-NXHD10R features an FM/AM tuner with preset station memory, allowing easy access to favorite radio channels. The system is designed with user-friendly controls, including a remote control for added convenience. The clear LCD display ensures visibility, even in low-light conditions.

In terms of design, the CA-NXHD10R is compact yet stylish, fitting seamlessly into various interior spaces. Its elegant finish and modern aesthetics make it an attractive addition to any room.

Sound customization is another highlight, with built-in equalizer settings that allow users to adjust audio to their liking. Whether it’s boosting bass or enhancing treble, this feature caters to individual preferences, ensuring a personalized listening experience.

The JVC CA-NXHD10R is designed with durability in mind, providing a reliable audio solution that withstands the test of time. Its combination of diverse input options, powerful sound delivery, and user-friendly features makes it a well-rounded choice for anyone looking to elevate their audio experience. Overall, the CA-NXHD10R is an excellent option for those seeking a high-performance, aesthetically pleasing sound system.
Top Page Image Contents