JVC CA-NXHD10R manual Album selection screen appears, Currently selected track starts playing

Continued

3)Press SET.

The album selection screen appears.

5 Press ALBUM + or ALBUM – to select an album where to copy the track into, then press SET.

6 Press ENTER.

The editing you have made is being stored in the HDD.

•If you have performed the above procedure during play, HDD playback stops.

If “CANNOT ENTRY LIB. Library TUN” appears in the main display

You have selected the album in “Library TUNER” in step 5. You cannot copy a track into the album in “Library TUNER.”

Copying a Portion of a Track—A-B COPY

You can copy only a portion of the track you want and store it as a new track (the first track) in a new album.

•You cannot set a start point within the first second and set an end point within the last 5 seconds of a track.

On the remote control ONLY:

If the HDD includes many albums and tracks, select the album and track using Search Mode (see page 38) before performing the procedure below.

1 Press TITLE/EDIT repeatedly until “TRACK EDIT?” appears in the main display, then press SET.

•The source changes to “HDD” automatically if another source has been selected.

2 Press SELECT ¢ or SELECT 4to select “A-B COPY?,” then press SET.

The currently selected track starts playing.

3 If necessary, select a track you want.

1)Press ALBUM + or ALBUM – to select an album.

2)Press SELECT ¢ or SELECT 4 to select a track.

•You can select the track directly using the number buttons. In this case, the selected track starts playback repeatedly.

By holding SELECT ¢ or SELECT 4, you can fast-forward or fast-reverse the track to find the start point.

4 Press SET when you find the start point (POSI.A) for

A-B copy.

The portion (of about 2-second length) following the selected start point repeats playing.

5 If necessary, press SELECT ¢ or SELECT 4to precisely adjust the start point.

The unit repeats the newly selected start point.

•You can shift the start point up to ±128. This range (±128) corresponds to about ±12 seconds from the original point (ADJUST 0).

6 Press SET.

Playback continues.

Within the first 4 seconds, this will not be shown.

By holding SELECT ¢ or SELECT 4, you can fast-forward or fast-reverse the track to find the end point.

•If you reach the end of the track while searching, you will go back to the start point (POSI.A).

7 Press SET again when you find the end point (POSI.B) for A-B copy.

The portion (of about 2-second length) following the selected end point repeats playing.

– 62 –