JVC CA-NXHD10R manual Symptom Possible Cause Action, HDD recording HDD editing

Page 85

Continued

Symptom

 

Possible Cause

 

Action

Unable to record into HDD.

Already 999 albums are created in the

Erase unnecessary albums.

 

HDD.

 

 

 

 

 

 

 

CD Auto Recording cannot be done correctly.

CD Auto Recording does not start.

Tuner Auto Recording does not start.

You have stopped the playback before the entire disc is played back.

Some of the tracks on the disc are copy-protected.

You have turned on the function after you started CD playback.

CD play is started by Daily Timer .

FM or AM (MW/LW) station is tuned in by Daily Timer or Recording Timer.

This is normal. (For details, see page 45.)

Use analog recording method (see page 51).

To use CD Auto Recording, stop playback, then restart CD playback. CD Auto Recording starts.

This is normal.

This is normal.

Smart Compression is canceled.

Some mechanical noises are heard during Smart Compression.

You have pressed STANDBY/ON

 

 

The unit now goes into standby mode.

 

 

while Smart Compression is performed.

 

 

 

 

 

While Smart Compression is being

This is normal.

performed, the internal hard disk is still

 

 

rotating at a high speed, causing

 

 

imperceptible mechanical noises.

 

 

 

 

 

 

 

HDD recording

HDD editing

If “Level OVER!” appears in the main display.

You can erase albums or tracks, but cannot use other editing functions such as “COPY,” “MOVE,” etc.

You cannot copy a portion from a track—“A-B COPY.”

You cannot move a track— “MOVE.”

Recording (input) level through the external component is too high.

There is no space left in the HDD— “HDD FULL.”

You have tried to copy a portion of a track of less than 6 seconds long.

You have tried to move a track to exactly the same position where it now located.

Adjust the input level (see page 25).

This is normal. To use other editing functions, first erase unnecessary albums and tracks to make enough space in the HDD.

This is normal.

You cannot set a start point within the first second and set an end point within the last 5 seconds of a track (see page 62).

Select another track number as the position to move the track to.

Tracks cannot be divided.

• Already 254 tracks are created in

• The maximum number of the tracks

 

 

the album.

 

in an album is 254.

 

 

 

 

Erase unnecessary tracks.

 

• You have tried to divide the track

• You cannot divide this track.

 

 

(album) in “Library TUNER.”

 

To divide this, copy this track to

 

 

 

 

another library.

 

• You have tried to divide a track of

• You cannot set a dividing point

 

 

less than 7 seconds long.

 

within the first 4 seconds and the last

 

 

 

 

3 seconds of a track.

 

 

 

 

 

– 80 –

Image 85
Contents LVT0859-004A CA-NXHD10RIf in Doubt Consult a Competent Electrician Class Laser Product Side view Front viewTo keep the continuity of the recorded sounds Introduction PrecautionsContents Front Panel Location of the ButtonsInside of Front Door Display Window Become familiar with the buttons on your unitFront Panel How to open the front doorDisplay Window To close the doorWhen using the remote control Remote ControlGetting Started Connecting AntennasUnpacking FM antennaYou can connect the speakers using the speaker cords Connecting SpeakersAM MW/LW antenna To connect an outdoor AM MW/LW antennaEx. When connecting a cassette deck Connecting Other EquipmentTo remove the speaker grille Speaker grilles are removable as shown belowConnecting a keyboard Putting the Batteries into the Remote ControlRemote control Basic SettingsFront panel Setting the Clock Turning On the PowerChanging the Display Brightness To adjust the clock againChanging the Display Contrast To turn on/off the clock indicationBasic and Common Operations Selecting the Sources and Starting Play Adjusting the VolumeLine To select the CD player as the source, press CD 3/8AHB 1 AHB AHB OFF canceled Adjusting the Bass and Treble SoundsSource indication canceled Reinforcing the Bass SoundAAC Sound OFF Mono Film canceled Using the AAC SoundsWhat is AAC? Hall MID Night Head PhonesListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning in to a StationFM AM Line To change the information shown in the main displayTuning in to a Preset Station Presetting StationsTo record a broadcast program automatically Changing the RDS Information Receiving FM Stations with RDSSearching for Programs by PTY Codes PTY Search PTYSwitching to a Program Type of Your Choice Temporarily Test function Alarm functionMore about the Enhanced Other Networks function Description of the PTY codes Playing Back the External Component Selecting the External Component Adjusting the Input LevelFM AM Changing the Source Name To cancel the setting, press CancelPress SET to finish changing the source name Selected source name appears in the main displayPqrs TUV Wxyz Playing Back CDs CD/CD-R/CD-RWPlaying Back the Entire CD-Normal Play Precautions on CD PlaybackBasic CD Operations To go to another track directly using the number buttonsPrograming the Playing Order of the Tracks -Program Play To stop playback for a momentPlaying at Random-Random Play To check the program contentsTo modify the program Prohibiting Disc Ejection-Disc Lock Repeating Tracks or CD-Repeat PlayRepeat 1TRK Repeat OFFMark Playing Back the HDD Hard Disk DriveHow tracks are recorded into the HDD Playing Back the Entire HDD Continuous PlayLibraries Press HDD 3/8To locate a particular point in a track during play Basic HDD OperationsTo select another album Playing Tracks in an Album-Album PlayTo select another library HDD Album HDD LibraryTo go to another track in the same album, press ¢ or Library indicator lights up on the displayTo go to another album in the same library, press Album or Album repeatedlyYou cannot cancel Repeat play during Random play Random and indicators light up on the displayRepeating Tracks-Repeat Play All tracks in the HDD are played repeatedly and endlesslySearching for Albums and Tracks to Play- Search Modes Canceled Last 10? Track title?Album T.? Track T.?Canceled Last 10? Repeat steps 4 1 and4 2 to enter other characters Available symbols are as followsPress Enter For Album Title SearchPlayed or recorded-LAST To search for one of the last 10 albums recentlyAlbum No.? Recording into the HDD About the digital formats used for recordings Before You Start RecordingHow the HDD separates the recorded tracks? About the maximum recording length for one trackCanceled TU Auto REC Using Automatic Recording FunctionsSmart COMP. CD Auto REC Press Select ¢ or Select 4to select ON? Press SETCD and Auto indicators go off CD and Auto indicators light up on the displayCD Auto Recording will be automatically canceled if To automatically record CDs-CD Auto RecordingSmart Comp CD Auto REC CanceledTU Auto REC How Tuner Auto Recording actually works?Recording CDs Press REC Mode on the unit to select the recording modeAAC128kbps AAC 96kbps PCM x1 REC PCM x4 REC PCM x2 REC Prepare a CDPress SET to finish the recording To record a single track during playbackEntry flashes in the main display for a while To stop while recording, pressRecording FM/AM MW/LW Broadcasts When the broadcast program ends, press 7 to stop recordingAAC128kbps AAC 96kbps To assign track numbers manually while recordingRecording the External Component When playback ends, press 7 to stop recordingStart playback on the external equipment When no sound comes in for more than 30 seconds To record CD into the HDD using analog recording modeTo cancel analog recording, press REC Start again To assign track numbers manually while recordingMark 2-ABC 3-DEF GHI 5-JKL 6-MNO Pqrs 8-TUV 9-WXYZ Making Your Own TitlesAssigning Titles to Albums and Tracks Canceled Track EDIT?To assign a title to an album TITLE? LIB. EDIT? Album EDIT?On the remote control only Press HDD 3/8 Press TITLE/EDIT again to exit from the title entry modeTo assign titles to tracks Assign the title by referring on Press EnterMark 2-ABC 3-DEF GHI 5-JKL 6-MNO Pqrs 8-TUV 9-WXYZ Editing the HDDLibrary Editing Introducing HDD Editing FunctionsAlbum Editing Track EditingPress SET Press SET again Unit enters the library name entry modeLibrary name entry screen appears in the main display Copying an Album-COPY Album Restoring the Libraries-RESTOREPress Select ¢ or Select 4to select Press SET Press EnterMaking a New Album-MAKE Album Moving an Album-LIB. ChangeConfirmation screen appears in the main display Press Select ¢ or Select 4 to selectTo make your best album later Erasing an Album-ERASEPress Select ¢ or Select 4to select ERASE?, then press SET Copying a Track-COPY Track Erasing All Albums-ALL ErasePress Enter again Album selection screen appears Press SET when you find the start point POSI.A for CopyCurrently selected track starts playing Playback continuesPlayback stops, and the library selection screen appears Moving a Track-MOVE11Press Enter Press Select ¢ or Select 4to select MOVE?, then press SETPress Select ¢ or Select 4to select DIVIDE?, then press SET Dividing a Track-DIVIDEIf Cannot Entry LIB. appears in the main display Joining Tracks-JOIN Press SET when you find the dividing pointPlayback stops To join the divided tracks, see the Join function thatPress Select ¢ or Select 4to select tracks Erasing a Track-ERASE TRKTo divide the joined tracks, see the Divide function on If Cannot Join appears in the main displayOff /TIMER Sleep Using the TimersHow Recording Timer actually works Using Recording TimerFM? AM? LINE? Recording source setting screen appearsMinute digit starts flashing For each recording mode, seeHow Daily Timer actually works Using Daily TimerFM? AM? CD? LINE?* HDD?How Sleep Timer actually works Using Sleep TimerTo turn on the Daily Timer, repeat , and press SET in step 120Timer Priority Using Auto Power OffTo sleep with Sleep Timer and wake up with Daily Timer To deactivate Auto Power Off, press A.P.offKeys Used for Operating This Unit Using an Optional KeyboardTo assign an album title-F1 Operating Procedures Using the KeyboardTo assign a track title-F2 To search for an album by entering its title-F6 To change a library name-F3To search for an album by its number-F5 To search for a track by entering its title-F7Cleaning the unit MaintenanceGeneral Notes Handling CDsMessages Signification SolutionMessage Cannot How to rebuild the HDDSignification CD playback Symptom TroubleshootingPossible Cause ActionHDD recording HDD editing Symptom Possible Cause ActionIf Level OVER! appears in the main display General Possible Cause ActionSpecifications Above ALL SP-NXHD10 Connection Remarque AnschlussNota AansluitingenCollegamento Tilslutning

CA-NXHD10R specifications

The JVC CA-NXHD10R is a compact, versatile audio system designed to deliver high-quality sound in a sleek, modern package. This system stands out with its unique combination of features, tools, and technologies that cater to both casual listeners and audiophiles alike.

One of the main features of the CA-NXHD10R is its powerful 2-way speaker system, which produces rich and clear audio across a wide frequency range. This ensures that users can enjoy their favorite music genres, from classical to rock, with the fidelity they deserve. The system is complemented by an integrated amplifier that delivers a robust output, making it suitable for home use as well as small gatherings.

The CA-NXHD10R boasts a built-in CD player, allowing users to enjoy their CD collections without the need for additional equipment. Additionally, the system is equipped with a USB port, providing an easy way to connect USB devices and play music directly from flash drives. The inclusion of Bluetooth technology adds a contemporary touch, enabling wireless streaming from smartphones and tablets. This makes it incredibly convenient for users to access a vast library of music from popular streaming services.

For those who appreciate radio, the JVC CA-NXHD10R features an FM/AM tuner with preset station memory, allowing easy access to favorite radio channels. The system is designed with user-friendly controls, including a remote control for added convenience. The clear LCD display ensures visibility, even in low-light conditions.

In terms of design, the CA-NXHD10R is compact yet stylish, fitting seamlessly into various interior spaces. Its elegant finish and modern aesthetics make it an attractive addition to any room.

Sound customization is another highlight, with built-in equalizer settings that allow users to adjust audio to their liking. Whether it’s boosting bass or enhancing treble, this feature caters to individual preferences, ensuring a personalized listening experience.

The JVC CA-NXHD10R is designed with durability in mind, providing a reliable audio solution that withstands the test of time. Its combination of diverse input options, powerful sound delivery, and user-friendly features makes it a well-rounded choice for anyone looking to elevate their audio experience. Overall, the CA-NXHD10R is an excellent option for those seeking a high-performance, aesthetically pleasing sound system.