JVC CA-NXHD10R manual Recording FM/AM MW/LW Broadcasts, AAC128kbps AAC 96kbps

Page 54

Recording FM/AM (MW/LW) Broadcasts

This unit is equipped with the following recording modes to record broadcast programs.

•AAC128kbps : AAC format is used at the bit rate of 128 kbps.

•AAC 96kbps : AAC format is used at the bit rate of 96 kbps.

1 Tune in to a station you want (see page 18).

2 Press REC MODE on the unit to select the recording mode.

Current recording AAC 128 mode setting

4

5

6

*Remaining recording time is calculated based on the current setting of the recording mode.

When the broadcast program ends, press 7 to stop recording.

The following message appears in the main display.

Press LIBRARY to select a library where you store the recording just done.

•Each time you press LIBRARY, the library changes— “Library 1” to “Library 10.”

•If you do not select any library within one minute, Library 1 is automatically selected.

Press SET to finish the recording.

“ENTRY” flashes in the main display for a while.

Ex. When selecting “AAC128kbps”

•Each time you press the button, the recording modes change as follows:

AAC128kbps AAC 96kbps

The indicator corresponding to the selected recording mode lights up on the display.

3 Press REC START to start recording.

The REC indicator lights up on the display and the recording starts.

REC

REC

indicator

AAC 128

 

Preset station number

Station frequency

if any

 

If “TU AUTO REC OFF PLEASE!” appears in the main display

You cannot start recording using this method while Tuner Auto Recording is being performed (see page 46 and 47).

While recording, you cannot change the source or station

If you need to change the source or station, stop recording first.

To assign track numbers manually while recording

Press SET at the place where you want to assign another track number.

“TRK INCRE. (increment)” appears in the main display for a while.

•For details, see “How the HDD separates the recorded tracks?” on page 43.

Remaining recording time in the HDD*

– 49 –

Page 53 Page 55
Image 54
Page 53 Page 55
Contents CA-NXHD10R LVT0859-004AIf in Doubt Consult a Competent Electrician Class Laser Product Front view Side viewTo keep the continuity of the recorded sounds Precautions IntroductionContents Inside of Front Door Display Window Location of the ButtonsFront Panel Become familiar with the buttons on your unitDisplay Window How to open the front doorFront Panel To close the doorRemote Control When using the remote controlUnpacking Connecting AntennasGetting Started FM antennaAM MW/LW antenna Connecting SpeakersYou can connect the speakers using the speaker cords To connect an outdoor AM MW/LW antennaTo remove the speaker grille Connecting Other EquipmentEx. When connecting a cassette deck Speaker grilles are removable as shown belowPutting the Batteries into the Remote Control Connecting a keyboardBasic Settings Remote controlFront panel Turning On the Power Setting the ClockChanging the Display Contrast To adjust the clock againChanging the Display Brightness To turn on/off the clock indicationBasic and Common Operations Line Adjusting the VolumeSelecting the Sources and Starting Play To select the CD player as the source, press CD 3/8Source indication canceled Adjusting the Bass and Treble SoundsAHB 1 AHB AHB OFF canceled Reinforcing the Bass SoundWhat is AAC? Using the AAC SoundsAAC Sound OFF Mono Film canceled Hall MID Night Head PhonesListening to FM and AM MW/LW Broadcasts FM AM Line Tuning in to a StationTo change the FM reception mode To change the information shown in the main displayPresetting Stations Tuning in to a Preset StationTo record a broadcast program automatically Searching for Programs by PTY Codes PTY Search Receiving FM Stations with RDSChanging the RDS Information PTYSwitching to a Program Type of Your Choice Temporarily Alarm function Test functionMore about the Enhanced Other Networks function Description of the PTY codes Playing Back the External Component Adjusting the Input Level Selecting the External ComponentFM AM Press SET to finish changing the source name To cancel the setting, press CancelChanging the Source Name Selected source name appears in the main displayPlaying Back CDs CD/CD-R/CD-RW Pqrs TUV WxyzPrecautions on CD Playback Playing Back the Entire CD-Normal PlayPrograming the Playing Order of the Tracks -Program Play To go to another track directly using the number buttonsBasic CD Operations To stop playback for a momentTo check the program contents Playing at Random-Random PlayTo modify the program Repeat 1TRK Repeating Tracks or CD-Repeat PlayProhibiting Disc Ejection-Disc Lock Repeat OFFPlaying Back the HDD Hard Disk Drive MarkLibraries Playing Back the Entire HDD Continuous PlayHow tracks are recorded into the HDD Press HDD 3/8Basic HDD Operations To locate a particular point in a track during playTo select another library Playing Tracks in an Album-Album PlayTo select another album HDD Album HDD LibraryTo go to another album in the same library, press Library indicator lights up on the displayTo go to another track in the same album, press ¢ or Album or Album repeatedlyRepeating Tracks-Repeat Play Random and indicators light up on the displayYou cannot cancel Repeat play during Random play All tracks in the HDD are played repeatedly and endlesslyAlbum T.? Canceled Last 10? Track title?Searching for Albums and Tracks to Play- Search Modes Track T.?Canceled Last 10? Press Enter Available symbols are as followsRepeat steps 4 1 and4 2 to enter other characters For Album Title SearchTo search for one of the last 10 albums recently Played or recorded-LASTAlbum No.? Recording into the HDD How the HDD separates the recorded tracks? Before You Start RecordingAbout the digital formats used for recordings About the maximum recording length for one trackSmart COMP. CD Auto REC Using Automatic Recording FunctionsCanceled TU Auto REC Press Select ¢ or Select 4to select ON? Press SETCD Auto Recording will be automatically canceled if CD and Auto indicators light up on the displayCD and Auto indicators go off To automatically record CDs-CD Auto RecordingTU Auto REC CanceledSmart Comp CD Auto REC How Tuner Auto Recording actually works?AAC128kbps AAC 96kbps PCM x1 REC PCM x4 REC PCM x2 REC Press REC Mode on the unit to select the recording modeRecording CDs Prepare a CDEntry flashes in the main display for a while To record a single track during playbackPress SET to finish the recording To stop while recording, pressAAC128kbps AAC 96kbps When the broadcast program ends, press 7 to stop recordingRecording FM/AM MW/LW Broadcasts To assign track numbers manually while recordingWhen playback ends, press 7 to stop recording Recording the External ComponentStart playback on the external equipment To cancel analog recording, press REC Start again To record CD into the HDD using analog recording modeWhen no sound comes in for more than 30 seconds To assign track numbers manually while recordingMaking Your Own Titles Mark 2-ABC 3-DEF GHI 5-JKL 6-MNO Pqrs 8-TUV 9-WXYZTo assign a title to an album Canceled Track EDIT?Assigning Titles to Albums and Tracks TITLE? LIB. EDIT? Album EDIT?To assign titles to tracks Press TITLE/EDIT again to exit from the title entry modeOn the remote control only Press HDD 3/8 Assign the title by referring on Press EnterEditing the HDD Mark 2-ABC 3-DEF GHI 5-JKL 6-MNO Pqrs 8-TUV 9-WXYZAlbum Editing Introducing HDD Editing FunctionsLibrary Editing Track EditingUnit enters the library name entry mode Press SET Press SET againLibrary name entry screen appears in the main display Press Select ¢ or Select 4to select Restoring the Libraries-RESTORECopying an Album-COPY Album Press SET Press EnterConfirmation screen appears in the main display Moving an Album-LIB. ChangeMaking a New Album-MAKE Album Press Select ¢ or Select 4 to selectErasing an Album-ERASE To make your best album laterPress Select ¢ or Select 4to select ERASE?, then press SET Erasing All Albums-ALL Erase Copying a Track-COPY TrackPress Enter again Currently selected track starts playing Press SET when you find the start point POSI.A for CopyAlbum selection screen appears Playback continues11Press Enter Moving a Track-MOVEPlayback stops, and the library selection screen appears Press Select ¢ or Select 4to select MOVE?, then press SETDividing a Track-DIVIDE Press Select ¢ or Select 4to select DIVIDE?, then press SETIf Cannot Entry LIB. appears in the main display Playback stops Press SET when you find the dividing pointJoining Tracks-JOIN To join the divided tracks, see the Join function thatTo divide the joined tracks, see the Divide function on Erasing a Track-ERASE TRKPress Select ¢ or Select 4to select tracks If Cannot Join appears in the main displayUsing the Timers Off /TIMER SleepUsing Recording Timer How Recording Timer actually worksMinute digit starts flashing Recording source setting screen appearsFM? AM? LINE? For each recording mode, seeFM? AM? CD? Using Daily TimerHow Daily Timer actually works LINE?* HDD?To turn on the Daily Timer, repeat , and press SET in step Using Sleep TimerHow Sleep Timer actually works 120To sleep with Sleep Timer and wake up with Daily Timer Using Auto Power OffTimer Priority To deactivate Auto Power Off, press A.P.offUsing an Optional Keyboard Keys Used for Operating This UnitOperating Procedures Using the Keyboard To assign an album title-F1To assign a track title-F2 To search for an album by its number-F5 To change a library name-F3To search for an album by entering its title-F6 To search for a track by entering its title-F7General Notes MaintenanceCleaning the unit Handling CDsSignification Solution MessagesMessage How to rebuild the HDD CannotSignification Possible Cause TroubleshootingCD playback Symptom ActionSymptom Possible Cause Action HDD recording HDD editingIf Level OVER! appears in the main display Possible Cause Action GeneralSpecifications Above ALL SP-NXHD10 Connection Anschluss RemarqueAansluitingen NotaCollegamento Tilslutning

CA-NXHD10R specifications

The JVC CA-NXHD10R is a compact, versatile audio system designed to deliver high-quality sound in a sleek, modern package. This system stands out with its unique combination of features, tools, and technologies that cater to both casual listeners and audiophiles alike.

One of the main features of the CA-NXHD10R is its powerful 2-way speaker system, which produces rich and clear audio across a wide frequency range. This ensures that users can enjoy their favorite music genres, from classical to rock, with the fidelity they deserve. The system is complemented by an integrated amplifier that delivers a robust output, making it suitable for home use as well as small gatherings.

The CA-NXHD10R boasts a built-in CD player, allowing users to enjoy their CD collections without the need for additional equipment. Additionally, the system is equipped with a USB port, providing an easy way to connect USB devices and play music directly from flash drives. The inclusion of Bluetooth technology adds a contemporary touch, enabling wireless streaming from smartphones and tablets. This makes it incredibly convenient for users to access a vast library of music from popular streaming services.

For those who appreciate radio, the JVC CA-NXHD10R features an FM/AM tuner with preset station memory, allowing easy access to favorite radio channels. The system is designed with user-friendly controls, including a remote control for added convenience. The clear LCD display ensures visibility, even in low-light conditions.

In terms of design, the CA-NXHD10R is compact yet stylish, fitting seamlessly into various interior spaces. Its elegant finish and modern aesthetics make it an attractive addition to any room.

Sound customization is another highlight, with built-in equalizer settings that allow users to adjust audio to their liking. Whether it’s boosting bass or enhancing treble, this feature caters to individual preferences, ensuring a personalized listening experience.

The JVC CA-NXHD10R is designed with durability in mind, providing a reliable audio solution that withstands the test of time. Its combination of diverse input options, powerful sound delivery, and user-friendly features makes it a well-rounded choice for anyone looking to elevate their audio experience. Overall, the CA-NXHD10R is an excellent option for those seeking a high-performance, aesthetically pleasing sound system.
Top Page Image Contents