ASSEMBLY AND SETUP
SPORT UPRIGHT BIKE ASSEMBLY
AND SETUP
Use the following procedures to unpack and assemble your STAR TRAC
UB / Ubx SPORT UPRIGHT BIKE.
UNPACKING
Open the shipping carton, remove all parts from the carton and foam inserts, and verify that the following parts are included in your shipment:
Description | Qty |
Bike Frame | 1 |
Display Console Assembly | 1 |
Seat Post Assembly | 1 |
Front Foot | 1 |
Rear Foot | 1 |
Pedals (set of two) | 1 |
Screw, Button Head, M10 X 30 | 8 |
Screw, Flat Head, M6 X 16 | 4 |
Screw, Socket Head, M6 X 10 | 1 |
TOOLS REQUIRED
Most STAR TRAC bikes can be assembled using the following tools:
■ | Metric Hex Key Wrenches | ■ | Channel Lock Pliers |
■ | Metric | ■ | Vice Grip Pliers |
■ | Metric Ratchet Socket Wrench Set | ■ | Rubber Mallet |
■ | Torque Wrench | ■ | Phillips Head Screwdriver |
Your STAR TRAC UB / Ubx SPORT UPRIGHT BIKE includes a hex key set and combination
ASSEMBLY
1. Install the Front Foot
NOTE: The front foot assembly has wheels attached to the front edge. Be sure the wheels face forward when installing the front foot assembly.
Stand the bike frame upright and place the front foot assembly under the frame, aligning the holes in the foot with the holes in the frame.
NOTE: It may be necessary to raise the frame slightly to align the holes in the frame with the mating holes in the front foot.
Using four M10 X 30 button head screws, secure the front foot assembly to the frame. Tighten all four screws securely.
Step 1
STAR TRAC SPORT BIKES OWNER’S MANUAL | 11 |