The following keys are used to modify MANAGER SETTINGS:
Increase and Decrease Level Keys: Display the next (Increase) and previous (Decrease) parameters. Keys will repeat if held.
Numeric Keypad: Facilitates entry of the desired value for the displayed parameter. These keys do not save the new value – see OK Key below.
OK Key: Updates (saves) the value of the displayed parameter in Flash memory. “UPDATING” will scroll once across the PROFILE Window while the update is in process. When the update is complete, the PROFILE Window will show the new value for the parameter.
NOTE: To exit maintenance SETTINGS without saving any values or settings, press the QUICK START key.
NOTE: Unless otherwise specified, the Item (parameter) name is shown in the PROFILE Window, and the value of the parameter is shown in the DISTANCE Window.
The items that you may display and change with the previous keys are:
| Lowest | Highest | Default | |
Item | Value | Value | Value | |
|
|
|
|
|
SN | 0 |
| 9999 | N/A |
DSW | 1.0 | 99.99 | N/A | |
OHR | 0 |
| 9999 | 0 |
DST | 0 |
| 9999 | 0 |
UNx | UNE | UNM | UNE | |
TIM | 5 |
| 99 | 99 |
WGT | 1 | (lb) | 500 (lb) | 155 (lb) |
| 1 | (kg) | 226 (kg) | 70 (kg) |
Lxx | N/A | N/A | LEN | |
LOE | OFF | ON | OFF | |
LOI | 001 | 999 | 001 | |
MDL | 1 |
| 2 | N/A |
QKS | 0 |
| 9999 | 0 |
MNL | 0 |
| 9999 | 0 |
BRN | 0 |
| 9999 | 0 |
INC | 0 |
| 9999 | 0 |
CHR | 0 |
| 9999 | 0 |
|
|
|
|
|
Meaning
Serial Number. Sport Bike serial number (set by factory).
Display Software. Display panel software version number (set by factory). NOTE: Software checksum value is displayed in CALORIES Window.
Operating Hours. Total operating hours.
Distance. Total distance ridden in miles or kilometers, based on current UNx setting.
Units. UNE (English) = units of pounds, miles, feet, inches UNM (Metric) = units of kilograms, kilometers, centimeters
NOTE: Current Value is shown in PROFILE Window.
Time. Maximum time in minutes allowed for a program, excluding
Default Weight (to user). Typical weight in lb (UNx = UNE) or kg (UNx = UNM).
Language. Display language; either LEN (English), LGE (German), LSP (Spanish), LDU (Dutch), LPO (Portuguese), LFR (French), LIT (Italian), LSW (Swedish) or LKA (Katakana).
Lockout Enable. Enables/disables lockout function.
Lockout ID. Lockout override identification number.
Model. 1 = TO BE DETERMINED 2 = TO BE DETERMINED
Quick Start. Number of times the Quick Start program was run since last reset.
Manual. Number of times the Manual program was run since last reset.
Burn Calories. Number of times the Burn Calories program was run since last reset.
Increase Endurance. Number of times the Increase Endurance program was run since last reset.
Constant Heart Rate. Number of times the Constant Heart Rate program was run since last reset.
STAR TRAC SPORT BIKES OWNER’S MANUAL | 31 |