MAINTENANCE OF YOUR SCHWINN®
ELLIPTICAL TRAINER
Moving your Elliptical Trainer | Fig. A |
To move the elliptical trainer, carefully but securely lift the rear end of the ellipti- cal trainer and slowly steer the elliptical trainer to the desired location (Fig A). Be gentle while moving the unit as any sharp impact directly or indirectly to the com- puter can affect computer operation.
Leveling your Elliptical Trainer The elliptical trainer can be leveled to compensate for uneven surfaces. To level the 430, raise or lower the two leveling bolts located on the underside of the rear stabilizer by screwing them in or out as needed.
Maintenance
Disconnect power supply before maintaining or servicing the elliptical trainer. Use a damp cloth to wipe your elliptical trainer and computer free of sweat. Inspect the elliptical trainer before each use. Replace all parts at the first sign of wear or damage. Call your authorized Schwinn® Fitness products distributor if you have any questions on the proper use or maintenance of this equipment or contact Nautilus Customer Service at
The safety level provided by the design of this equipment can only be maintained when the equipment is regularly examined for damage and wear. Inoperable components should be replaced immediately or the equipment be put out of use until it is repaired. Only
Daily: Before each use inspect for loose, broken, damaged or worn parts. Do not use if found in this condition; repair or replace.
Weekly: Check for smooth rear roller operation. Wipe any dust, dirt, or grime from the surfaces.
Monthly: Check all bolts and screws, and tighten as necessary.
IMPORTANT: To avoid damaging the finish on your elliptical trainer and computer, never use a
MAINTENANCE
23