41.Raise the Weight Selector (82). Place the remaining nine Weights (79) on the Weight Guides (83) by tipping the Weights as shown. Make sure that the Weights are turned so all of the pin grooves are under the Weights and are on the same side. Lower the Weight Selector into the Weights.
42.Open a Weight Sleeve (80) and close it around one of the Weight Guides (83). Close the other Weight Sleeve (80) around the other Weight Guide. Turn the Weight Sleeves so the hinged sides are toward each other.
43. Tip the top Weight (79) as shown. Fit the low
_Ju_ Ui L;_ VV_;*yllL ZllLU _ VV_,lyllL ,._l_t_vt_ _ou),
Fit the high side of the Weight into the other Weight Sleeve. Press the Weight and the Weight Sleeves down until they are resting on top of the other Weights.
44.Hold the open end of a Weight Sleeve Clip
(81)against one of the Weight Sleeves (80) as shown. Firmly press the Weight Sleeve Clip until it snaps around the Weight Sleeve.
Press the other Weight Sleeve Clip (81) onto the other Weight Sleeve (80) in the same manner.
41
Pin Grooves
42
8O
43 | II | \\\/I |
44
15