Sears 831.15931 owner manual Ordering Replacement Parts, Full 90 DAY Warranty

Page 24

ORDERING REPLACEMENT PARTS

Each SYSTEM has its own MODEL NUMBER. Always mention this MODEL NUMBER when request- ing service or repair parts for your SYSTEM.

All parts listed herein can be ordered through SEARS, ROEBUCK AND CO. SERVICE CENTERS and

most SEARS RETAIL STORES. If parts you need are not stocked locally, your order will be transmitted

to a SEARS PARTS DISTRIBUTION CENTER for handling.

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:

1.The MODEL NUMBER -of the product (831.159310).

2.The NAME of the product (SEARS LIFESTYLER ® SYSTEM 40 cross training system).

3.The PART NUMBER of the part(s) from the PART IDENTIFICATION (ID) CHART accompanying this owner's manual.

4.The DESCRIPTION of the part(s) from the PART IDENTIFICATION CHART accompanying this owner's manual.

Your SEARS SYSTEM has added value when you consider that SEARS has service units nationwide, staffed with SEARS trainedtechnici'ans specifically trained on SEARS products, having the pads, tools and equipment to ensure that we meet our pledge to you: "We service what we sell."

Should you ever need repair service or pads, call toll free:

For repair service: 1-800-4-REPAIR(1-800-473-7247)

For repair parts: !-800-FON-PART (I-800-366-7278)

u

I

FULL 90 DAY WARRANTY

I

For 90 days from the date of purchase, when proper assembly and maintenance procedures detailed'in the .Owner's Manual are followed, SEARS will, free of charge, repair or replace and install a replacement part for any defective partl when this cross training system is used in a normal manner.

This warranty does not apply when this cross training system is used for commercial or rental

purposes.

SERVICE-IS AVAILABLE SIMPLY BY CONTACTING YOUR NEAREST SEARS SERVICE

CENTER/DEPARTMENT IN THE UNITED STATES.

This warranty gives you specific legal rights, and you may also have other rights which vary

from state to state.

- '

SEARS_ ROEBUCK AND CO., DEPT. 817WA,

3333 BEVERLY ROAD, HOFFMAN ESTATES, IL 60179

Part No. 113517 10/93 © Sears, Roebuck and Co.

Printed in Canada

Image 24
Contents Model No Serial No Table of Contents Before YOU Begin Assembly Nylock Nuts until completeing step En the Nylock Nuts until completeing stepRound Inner Cap 30 into each side of the Arm Support Press two 1 3/4 x 1 3/4 Inner Caps 28 into Thou It -- tl-JuWith a 3/8 x 2 3/4 Bolt 16 and 3/8 Nylock Nut Four holes Must be on t 291616 I/ll With two 1/4 x 2Screws 9 and 1/4 Washers Tighten all Nylock Nuts used in assembly Steps Long Cable Under Bracket 97 with a 3/8 x 1 3/4 Bolt 3/8 Nylock Nut 2169Insert Attach the Cable to the same Bolt that was used \\\/I Bench Press Triad LEG System Page Using the Lifestyler System Changing the Weight SEnINGUsingthearmsin THEBUTrERFLYMODE Cise TROUBLE-SHOOTING and Maintenance Adjusting the CablesPart LIST/EXPLODED DRAWING--Model No 4442 Ordering Replacement Parts Full 90 DAY Warranty