Sears 831.15931 owner manual Usingthearmsin THEBUTrERFLYMODE, Cise

USINGTHEARMSIN THEBUTrERFLYMODE

To use the Arms (51) in the butterfly mode, the Arm Support (85) must be locked in a stationary position. To lock the Arm Support, insert a 4 1/2" "L" Pin (43) down through the center of the Arm Support and the bracket on the Front Upright (76). Set the other 4 1/2" "L" Pin (43) aside.

85

\\'

USING THE ARMS IN THE PRESS MODE

43

To use the Arms (51) in the press mode, the

Arms must be locked in a stationary position. Insert the two 4 1/2" "L" Pins (43) down through the Arm Support and the Arms. IMPORTANT: Always lock the arms in the stationary posi- tion with the 4 112" "L" Pins except when per- forming the butterfly or re-verse butterfly exer-

cise.

ATTACHING THE LAT BAR OR NYLON STRAP

TO THE H!GH C.A.BLE

<

The Lat Bar (87) can be attached to the high cable with a Cable Clip (89). For some exercises, the Chain (88) must be attached between the Lat Bar and the high cable with two Cable Clips. The distance between the Lat Bar and the high cable can be adjusted by attaching the Cable Clips closer together o_rfarther apart along the Chain.

The Nylon Strap (90) can be attached to the high cable in the same manner.

ATTACHING THE LAT BAR OR NYLON STRAP

TO THE LOW CABLE

The Lat Bar (87-) can be attached to the low cable with a Cable Clip (89). For some exercises, the Chain (88) must be attached between the Lat Bar and the low cable with two Cable Clips.-The dis- tance between the Lat Bar and the low cable can

be adjusted by attaching the Cable Ciips closer

together or farther apart along the Chain.

87

The Nylon Strap (90) can be attached to the high

20cable in the same manner.