English
Adjusting the Volume Level
You can adjust the volume level only while the unit is turned on. The volume level can be adjusted between “VOLUME 0”
– “VOLUME 40.”
• The volume level has no effect on recording.
Reinforcing the Bass Sound
The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume level
• This function only affects the playback sound, and does not |
affect your recording. |
On the remote control:
To increase the volume level, press
VOLUME +.
To decrease the volume level, press VOLUME
•When you press and hold either button, you can change the volume level continuously.
On the unit:
To increase the volume level, turn the
VOLUME + / – control clockwise.
To decrease the volume level, turn the
VOLUME + / – control counterclockwise.
VOLUME
VOLUME +
• This function also affects the sound from headphones. |
To get the effect, press AHB PRO repeatedly. | AHB PRO |
|
The AHBPRO indicator also lights up on the display.
AHBPRO indicator
AHBPRO
–
•If “CANNOT LISTEN” appears on the display
During
•For private listening
Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume level before connecting or putting on the headphones.
DO NOT turn off (standby) the unit with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.
REMEMBER you cannot adjust the volume level while the unit is on standby (off).
•Each time you press the button, the Active Hyper Bass Pro effect level changes as follows:
AHB PRO 1 AHB PRO 2
AHB PRO OFF
(canceled)
• “AHB PRO 2” is more effective than “AHB PRO 1.”
To cancel the effect, press AHB PRO repeatedly until “AHB PRO OFF” appears on the display.
The AHBPRO indicator goes off.
11