JVC 0803AIMMDWJEM, CA-UXJ55MD, GVT0104-002A Maintenance, To clean the disc, Stains on the unit

Page 62

English

Maintenance

To get the best performance of the unit, keep your discs, tapes and mechanism clean.

General Notes

In general, you will have the best performance by keeping your discs, tapes and the mechanism clean.

Store discs and tapes in their cases, and keep them in cabinets or on shelves.

Keep the unit’s disc trays closed when not in use.

Continued use of irregular shape discs (heart-shape, octagonal, etc.) can damage the unit.

Handling discs

• Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

• Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean the disc.

Handling MDs

Do not open the shutter.

– The shutter is locked so that it will

not open. Trying to force it open will break the MD. If the shutter opens accidentally, close it again quickly without touching the MD inside.

Do not place MDs in the following places:

– High temperature areas such as in

direct sunlight or inside a car.

High humidity areas, e.g. in a bathroom.

On a beach or sandy area.

Clean MDs regularly.

If dust or dirt gets on cartridge, wipe it off with a soft dry cloth.

Handling cassette tapes

• If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.

If the tape is loose, it may get stretched, cut, or caught in the cassette.

• Be careful not to touch the tape surface.

• Avoid storing tapes in any of the following places:

– In dusty places

– In direct sunlight or heat

– In moist areas

– On a TV or speaker

– Near a magnet

Cleaning the unit

Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

Since the unit may deteriorate in quality, become damaged or have its paint peel off, be careful about the following:

DO NOT wipe it with a rough cloth.

DO NOT wipe it too vigorously.

DO NOT wipe it with thinner or benzine.

DO NOT apply any volatile substance such as an insecticide to it.

DO NOT allow any rubber or plastic to remain in contact with it for a long time.

59

Image 62
Contents CA-UXJ55MD Page Important for Laser Products About This Manual PrecautionsIntroduction Contents Front panel Location of the Buttons and ControlsFront Panel Display window on the front panel Display windowRemote Control See pages in parentheses for detailsUnpacking Connecting AntennasGetting Started FM antennaTo connect an outdoor AM antenna Connecting SpeakersAM antenna To connect speakersTo connect external equipment Connecting External EquipmentPutting the Batteries into the Remote Control To play the other equipment through this unit, connectTo change the clock again Setting the ClockBasic and Common Operations To check the clock time with tonesTurning On/Off the Key-touch Tone To turn off the clock indication Power SaveOn the remote control To turn off the unit automatically Auto StandbyAdjusting the Volume Level Reinforcing the Bass SoundChanging the Display Brightness Adjusting the TonePress BASS/TREBLE to adjust the Bass Bass or treble levelListening to FM and AM Broadcasts Tuning in to a StationTo change the FM reception mode Press and hold ¢or 4for more than 1 secondPresetting Stations Tuning in to a Preset StationPlaying Back All the Discs Continuous Play When playing a CD-R or CD-RWPlaying Back Discs on the 5-CD Changer Loading DiscsTo start playing a disc during playback of another disc Basic Disc OperationsTo change a disc during playback of another disc To locate a particular point in a track during playTo change the information shown on the display To go to another track directly using the number buttonsPrograming the Track Playing Order -Program Play To modify the program To check the program contentsPlaying at Random-Random Play To erase the entire programProhibiting Disc Ejection-Disc Lock Repeat PlayBasic MD Operations Playing Back MDsPlaying Back the Entire MD -Normal Play To stop play for a momentPress ¢or 4repeatedly While playing or pausingWhen the MD recorder stops Press the number buttons to select the tracks Load an MDUntil MD Program appears On the display Repeat to program other tracks you wantLoad an MD including groups Playing Tracks in a Group-Group PlayUntil MD Random appears On the display Until MD Group appears on DisplayPress Title Search Repeating Tracks-Repeat PlaySearching for Tracks to Play MD Title Search Enter the characters to search for the trackTo prohibit MD ejection-MD Lock Available symbols are as followsPress Enter To enter a C or c, pressPlaying Back a Tape To play both sides-Reverse ModePlaying Back Tapes Press Tape 2Listening to External Equipment Listening to External EquipmentAbout the track marks Recording on MDsBefore You Start Recording on an MD To avoid erasing important recordingsAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeTo set the recording length mode Setting MD Recording ModesTo set group recording mode To set LP-prefix addition modePress MD REC when the selected Press CD REC Mode to select the CD RECRecording mode Recording mode in is still Shown on the displayPrepare the source to record from Press CD REC Mode to selectTrack mark entry mode Press MD RECTo protect your recordings Recording on TapesBefore You Start Recording on a Tape To keep the best recording and playback sound qualityRecording onto a Tape Reverse modeRecording CD onto a Tape CD-Tape Synchronized Recording Press Tape REC whenTo record a single track of a CD/MD during play Press Tape RECFor the MD CD Synchronized RecordingPress MD&TAPE REC For the cassetteEditing MDs Using MD Groups as a separate itemHow to make up Groups Guidance-MD Group FunctionsIntroducing Group Editing Functions Forming a Group-FORM GR Repeatedly until Entry GR ? Appears on the display To cancel the setting, press CANCEL, then repeat fromYou can also select the track using TrackTrack as the dividing Point Dividing a Group-DIVIDE GRRepeatedly until Divide GR? Appears on the display To join the divided groups, see the Join GR function onRepeatedly until Join GR ? Appears on the display When Cannot Join appears on the display in stepJoining Two Groups-JOIN GR Press Group Skip ¢or Group Skip Moving a Group-MOVE GRRepeatedly until Move GR ? Appears on the display 4while holding Shift to select the groupDissolving All Groups-UNGR ALL To cancel the setting, press CancelUngrouping Tracks-UNGROUP Repeatedly until Ungroup ? Appears on the displayErasing Tracks in a Group-ERASE GR Repeatedly until Erase GR ? Appears on the displayIntroducing Track Editing Functions Dividing a Track-DIVIDE Loading slot Joining Two Tracks-JOINInsert an MD you want to edit into the MD Until Join ? appears on DisplayUntil Move ? appears on Display Position where you want To move the track toMoving a Track-MOVE Track you want to moveUntil ERASE? appears on Display Erasing Tracks-ERASEErasing All Tracks-ALL Erase Track you want to eraseAssigning Titles to an MD Title entry modeSelected title entry mode Press or To changePress Enter to finish the current Press Cancel to exit fromEnter characters Title entrySelect the character you Changing the TitleFollow steps 1 to 4 on Want to correct, by pressingHow Recording Timer actually works Using the TimersUsing Recording Timer Set the start time Set the shut-off timePress CLOCK/TIMER repeatedly Using Daily TimerHow Daily Timer actually works Until Daily Timer appearsTo adjust the volume level Adjust the volume levelVolume setting appears on Display To turn off the Daily Timer after its setting is doneHow Sleep Timer actually works Using Sleep TimerTimer Priority Stains on the unit MaintenanceTo clean the disc English MD limitations Scms Serial Copy Management SystemHcms High-speed Copy Management System Cannot REC x1 or x2 only CD/MD MessagesCannot REC x1 REC only Troubleshooting NON Audio or DVDSpecifications EN, CS Victor Company of JAPAN, Limited 0803AIMMDWJEM