JVC CA-UXJ55MD, GVT0104-002A manual Playing at Random-Random Play, To check the program contents

Page 21

Continued

English

If Program Play is still activated, you cannot eject the discs.

To open disc trays (eject discs), before or after play, press PLAY MODE once or twice so that the unit enters another play mode (Random Play or Continuous Play) before pressing the disc eject buttons (CD10 to CD50).

To check the program contents

If your entry is ignored

You are trying to program a track from an empty tray, or a track number that does not exist on the disc.

If “NO READ” appears on the display

You are selecting the disc that the unit has not yet read. Press DISC UP

or DISC DOWN to select the disc so that its disc information is shown on the display.

If the total playing time is 100 minutes or more

The total playing time on the display will not be shown. “– – :–” will appear.

On the remote control ONLY:

Before playing, you can check the

GROUP SKIP

GROUP SKIP

 

program contents by pressing ¢ or

4.

¢: Shows the programed tracks in the programed order.

4: Shows them in the reverse order.

Pressing 4 first time after you have programed shows the first track in the program.

To modify the program

On the remote control ONLY:

Before playing, you can erase the last

CANCEL

programed track by pressing CANCEL.

 

Each time you press the button, the last programed track is erased from the program.

To add tracks to the program before playing, simply select

the disc numbers and track numbers you want to add by following steps 3 and 4 in Program Play.

To erase the entire program

1 Press 7 to stop playback.

2 Press PLAY MODE once or twice PLAY

MODE

so that the unit enters another playback mode (Random Play or Continuous Play).

Playing at Random—Random Play

The tracks of all loaded discs will be played at random.

To use Repeat Play (see page 19), press REPEAT after starting Random Play.

1 Load discs into the 5-CD changer.

If the current playing source is not “CD,” press CD 6, then 7 before going to the next step.

On the remote control ONLY:

2 Press PLAY MODE repeatedly

MODE

 

 

PLAY

until “CD RANDOM” appears on

 

the display.

 

 

The RANDOM indicator also lights up on the

 

display.

 

 

 

RANDOM indicator

 

C D

 

 

1 2 3 4 5

RANDOM

 

Each time you press the button, play mode changes as follows:

 

 

 

 

CD PROGRAM

 

CD RANDOM

 

 

 

 

(Program Play)

 

(Random Play)

 

 

 

 

 

 

Continuous Play

 

 

 

 

 

 

 

 

 

 

 

3 Press CD 6.

 

 

 

CD

 

 

The tracks are played at random.

6

 

 

Random Play ends when all the tracks are

 

 

 

 

played once (when Repeat Play is not activated).

3 Press disc eject buttons (CD10 to CD50) on the unit to eject all the discs used for making the program.

CD1 0

CD2 0

CD3 0

CD4 0

CD5 0

The program will also be erased, when you unplug the AC power cord or a power failure occurs.

If you try to program a 33rd track “MEMORY FULL” will appear on the display.

To stop during play, press 7.

• Opening a disc tray also stops and cancels Random Play.

To skip the current playing track, press ¢.

To skip back to the beginning of the current track, press 4.

• You cannot go back to the previous tracks.

To exit from Random Play, before or after play, press PLAY MODE once or twice so that the unit enters another play mode (Continuous Play or Program Play).

The RANDOM indicator goes off.

Turning off the unit also cancels Random Play and changes play mode to Continuous Play.

18

Image 21
Contents CA-UXJ55MD Page Important for Laser Products Precautions IntroductionAbout This Manual Contents Location of the Buttons and Controls Front PanelFront panel Display window Display window on the front panelSee pages in parentheses for details Remote ControlGetting Started Connecting AntennasUnpacking FM antennaAM antenna Connecting SpeakersTo connect an outdoor AM antenna To connect speakersPutting the Batteries into the Remote Control Connecting External EquipmentTo connect external equipment To play the other equipment through this unit, connectBasic and Common Operations Setting the ClockTo change the clock again To check the clock time with tonesOn the remote control To turn off the clock indication Power SaveTurning On/Off the Key-touch Tone To turn off the unit automatically Auto StandbyReinforcing the Bass Sound Adjusting the Volume LevelPress BASS/TREBLE to adjust the Bass Adjusting the ToneChanging the Display Brightness Bass or treble levelTo change the FM reception mode Tuning in to a StationListening to FM and AM Broadcasts Press and hold ¢or 4for more than 1 secondTuning in to a Preset Station Presetting StationsPlaying Back Discs on the 5-CD Changer When playing a CD-R or CD-RWPlaying Back All the Discs Continuous Play Loading DiscsTo change a disc during playback of another disc Basic Disc OperationsTo start playing a disc during playback of another disc To locate a particular point in a track during playTo go to another track directly using the number buttons Programing the Track Playing Order -Program PlayTo change the information shown on the display Playing at Random-Random Play To check the program contentsTo modify the program To erase the entire programRepeat Play Prohibiting Disc Ejection-Disc LockPlaying Back the Entire MD -Normal Play Playing Back MDsBasic MD Operations To stop play for a momentWhile playing or pausing When the MD recorder stopsPress ¢or 4repeatedly Until MD Program appears On the display Load an MDPress the number buttons to select the tracks Repeat to program other tracks you wantUntil MD Random appears On the display Playing Tracks in a Group-Group PlayLoad an MD including groups Until MD Group appears on DisplaySearching for Tracks to Play MD Title Search Repeating Tracks-Repeat PlayPress Title Search Enter the characters to search for the trackPress Enter Available symbols are as followsTo prohibit MD ejection-MD Lock To enter a C or c, pressPlaying Back Tapes To play both sides-Reverse ModePlaying Back a Tape Press Tape 2Listening to External Equipment Listening to External EquipmentBefore You Start Recording on an MD Recording on MDsAbout the track marks To avoid erasing important recordingsStereo Long-Hour Recording Mdlp Precautions for performing long-hour stereo recordingAbout High-Speed Recording To check the remaining recording timeTo set group recording mode Setting MD Recording ModesTo set the recording length mode To set LP-prefix addition modeRecording mode Press CD REC Mode to select the CD RECPress MD REC when the selected Recording mode in is still Shown on the displayTrack mark entry mode Press CD REC Mode to selectPrepare the source to record from Press MD RECBefore You Start Recording on a Tape Recording on TapesTo protect your recordings To keep the best recording and playback sound qualityRecording CD onto a Tape CD-Tape Synchronized Recording Reverse modeRecording onto a Tape Press Tape REC whenPress Tape REC To record a single track of a CD/MD during playPress MD&TAPE REC CD Synchronized RecordingFor the MD For the cassetteHow to make up Groups Using MD Groups as a separate itemEditing MDs Guidance-MD Group FunctionsIntroducing Group Editing Functions Forming a Group-FORM GR You can also select the track using To cancel the setting, press CANCEL, then repeat fromRepeatedly until Entry GR ? Appears on the display TrackRepeatedly until Divide GR? Appears on the display Dividing a Group-DIVIDE GRTrack as the dividing Point To join the divided groups, see the Join GR function onWhen Cannot Join appears on the display in step Joining Two Groups-JOIN GRRepeatedly until Join GR ? Appears on the display Repeatedly until Move GR ? Appears on the display Moving a Group-MOVE GRPress Group Skip ¢or Group Skip 4while holding Shift to select the groupUngrouping Tracks-UNGROUP To cancel the setting, press CancelDissolving All Groups-UNGR ALL Repeatedly until Ungroup ? Appears on the displayRepeatedly until Erase GR ? Appears on the display Erasing Tracks in a Group-ERASE GRIntroducing Track Editing Functions Dividing a Track-DIVIDE Insert an MD you want to edit into the MD Joining Two Tracks-JOINLoading slot Until Join ? appears on DisplayMoving a Track-MOVE Position where you want To move the track toUntil Move ? appears on Display Track you want to moveErasing All Tracks-ALL Erase Erasing Tracks-ERASEUntil ERASE? appears on Display Track you want to eraseSelected title entry mode Title entry modeAssigning Titles to an MD Press or To changeEnter characters Press Cancel to exit fromPress Enter to finish the current Title entryFollow steps 1 to 4 on Changing the TitleSelect the character you Want to correct, by pressingUsing the Timers Using Recording TimerHow Recording Timer actually works Set the shut-off time Set the start timeHow Daily Timer actually works Using Daily TimerPress CLOCK/TIMER repeatedly Until Daily Timer appearsVolume setting appears on Display Adjust the volume levelTo adjust the volume level To turn off the Daily Timer after its setting is doneUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance To clean the discStains on the unit English Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD limitations CD/MD Messages Cannot REC x1 REC onlyCannot REC x1 or x2 only NON Audio or DVD TroubleshootingSpecifications EN, CS Victor Company of JAPAN, Limited 0803AIMMDWJEM