
English
Stereo Long-Hour Recording (MDLP)
On conventional MD recorders, 2 times
With this feature, songs (tracks) can be recorded on a single MD using different recording length
SP: Signifies
LP2: Signifies 2 times
LP4: Signifies 4 times
REMEMBER to check the remaining recording time of MDs before start recording
The remaining recording time of MDs will be calculated and shown, based on the recording length mode (SP/LP2/ LP4) currently selected.
Before start recording or using the Recording Timer, check the remaining recording time on the MD for each recording length mode (SP/LP2/LP4) and select the optimum recording length mode.
To check the remaining recording time
Press DISP/CHARA repeatedly until “REC REMAIN” and the remaining time based on the current recording mode appear on the display.
Precautions for performing long-hour stereo recording
After having made
•Songs (tracks) recorded in 2 times or 4 times
•When editing songs (tracks) on an MD, you cannot join (JOIN) songs (tracks) recorded in different recording length modes (SP/LP2/LP4).
More about MDLP
•You cannot make a
•Sound quality will decrease as the recording length mode changes to LP2 (little) and LP4 (much). To obtain the best sound quality, it is recommended to use the SP mode when recording.
About High-Speed Recording
The time for
There are some restrictions to observe for
This unit is so designed that a song (track) recorded from a CD using
If you try to
REMEMBER if you are trying to record a program including the same song (track) twice using
During high-speed recording
You cannot listen to any source, and therefore, cannot adjust the volume level. (“CANNOT LISTEN” will appear on the display if you try to do.)
29