JVC CA-UXJ55MD, GVT0104-002A, 0803AIMMDWJEM manual Troubleshooting, NON Audio or DVD

Page 66

English

Message

 

Signification

Solution

MD NO DISC

NON AUDIO (or DVD)

CAN NOT COPY

PLAY BACK

DISC

READ ERROR

SCMS CANNOT

COPY

There is no MD.

You are trying to copy a non-audio disc like a CD-ROM, Video CD, or DVD. You are trying to edit or record on a playback-only MD.

The UTOC fails to be read.

Digital copy of the 2nd generation is prohibited.

Put an MD.

Stop recording.

Use a recordable MD.

Turn off the unit, then turn on it again. You cannot make a digital recording from a duplicated CD-R/RW onto an MD. If you try to do so, the unit will automatically convert the digital signals to analog signals and record them at x1 speed (normal speed).

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

Power does not come on.

Operations are disabled.

No sound is heard.

Possible Cause

The power cord is not connected to an AC outlet.

The built-in microprocessor has malfunctioned due to external electrical interference.

•Connections are incorrect or loose.

•A pair of headphones is connected.

Action

Insert the plug into the socket.

Unplug the AC power cord then plug it back in.

• Check all connections and make

corrections. (See pages 6 to 8.)

• Unplug the headphones from the

PHONES jack.

Unable to operate the unit by the remote control.

Hard to listen to broadcasts because of noise.

Loaded discs, MD, and cassette cannot be ejected.

The disc does not play.

The CD skips.

Unable to record on an MD.

Impossible to record on a tape.

•The path between the remote control and the remote sensor on the unit is blocked.

•The batteries are exhausted.

•You are using the remote control too far from the unit.

•Antennas are disconnected.

•The AM loop antenna is too close to the unit.

•The FM antenna is not properly extended and positioned.

•The AC power cord is not plugged in.

•The Disc Lock function is in use.

The disc is upside down.

The CD is dirty or scratched.

•You are using a protected MD.

•The MD is write protected.

Small tabs on the back of the cassette are removed.

• Remove the obstruction.

• Replace the batteries. (See page 8.)

• Signals cannot reach the remote

sensor. Move closer to the unit.

• Reconnect the antenna correctly and

securely.

• Change the position and direction of

the AM loop antenna.

• Extend FM antenna and orient to the

best reception position.

• Plug in the AC power cord.

• Cancel the Disc Lock function. (See

page 19.)

Put the disc in with the label side up.

Clean or replace the CD. (See page 59.)

•Change it with a recordable MD.

•Unprotect the MD. (See page 28.)

Cover the holes with adhesive tape.

63

Page 65 Page 67
Image 66
Page 65 Page 67
Contents CA-UXJ55MD Page Important for Laser Products Precautions IntroductionAbout This Manual Contents Location of the Buttons and Controls Front PanelFront panel Display window on the front panel Display windowRemote Control See pages in parentheses for detailsUnpacking Connecting AntennasGetting Started FM antennaTo connect an outdoor AM antenna Connecting SpeakersAM antenna To connect speakersTo connect external equipment Connecting External EquipmentPutting the Batteries into the Remote Control To play the other equipment through this unit, connectTo change the clock again Setting the ClockBasic and Common Operations To check the clock time with tonesTurning On/Off the Key-touch Tone To turn off the clock indication Power SaveOn the remote control To turn off the unit automatically Auto StandbyAdjusting the Volume Level Reinforcing the Bass SoundChanging the Display Brightness Adjusting the TonePress BASS/TREBLE to adjust the Bass Bass or treble levelListening to FM and AM Broadcasts Tuning in to a StationTo change the FM reception mode Press and hold ¢or 4for more than 1 secondPresetting Stations Tuning in to a Preset StationPlaying Back All the Discs Continuous Play When playing a CD-R or CD-RWPlaying Back Discs on the 5-CD Changer Loading DiscsTo start playing a disc during playback of another disc Basic Disc OperationsTo change a disc during playback of another disc To locate a particular point in a track during playTo go to another track directly using the number buttons Programing the Track Playing Order -Program PlayTo change the information shown on the display To modify the program To check the program contentsPlaying at Random-Random Play To erase the entire programProhibiting Disc Ejection-Disc Lock Repeat PlayBasic MD Operations Playing Back MDsPlaying Back the Entire MD -Normal Play To stop play for a momentWhile playing or pausing When the MD recorder stopsPress ¢or 4repeatedly Press the number buttons to select the tracks Load an MDUntil MD Program appears On the display Repeat to program other tracks you wantLoad an MD including groups Playing Tracks in a Group-Group PlayUntil MD Random appears On the display Until MD Group appears on DisplayPress Title Search Repeating Tracks-Repeat PlaySearching for Tracks to Play MD Title Search Enter the characters to search for the trackTo prohibit MD ejection-MD Lock Available symbols are as followsPress Enter To enter a C or c, pressPlaying Back a Tape To play both sides-Reverse ModePlaying Back Tapes Press Tape 2Listening to External Equipment Listening to External EquipmentAbout the track marks Recording on MDsBefore You Start Recording on an MD To avoid erasing important recordingsAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeTo set the recording length mode Setting MD Recording ModesTo set group recording mode To set LP-prefix addition modePress MD REC when the selected Press CD REC Mode to select the CD RECRecording mode Recording mode in is still Shown on the displayPrepare the source to record from Press CD REC Mode to selectTrack mark entry mode Press MD RECTo protect your recordings Recording on TapesBefore You Start Recording on a Tape To keep the best recording and playback sound qualityRecording onto a Tape Reverse modeRecording CD onto a Tape CD-Tape Synchronized Recording Press Tape REC whenTo record a single track of a CD/MD during play Press Tape RECFor the MD CD Synchronized RecordingPress MD&TAPE REC For the cassetteEditing MDs Using MD Groups as a separate itemHow to make up Groups Guidance-MD Group FunctionsIntroducing Group Editing Functions Forming a Group-FORM GR Repeatedly until Entry GR ? Appears on the display To cancel the setting, press CANCEL, then repeat fromYou can also select the track using TrackTrack as the dividing Point Dividing a Group-DIVIDE GRRepeatedly until Divide GR? Appears on the display To join the divided groups, see the Join GR function onWhen Cannot Join appears on the display in step Joining Two Groups-JOIN GRRepeatedly until Join GR ? Appears on the display Press Group Skip ¢or Group Skip Moving a Group-MOVE GRRepeatedly until Move GR ? Appears on the display 4while holding Shift to select the groupDissolving All Groups-UNGR ALL To cancel the setting, press CancelUngrouping Tracks-UNGROUP Repeatedly until Ungroup ? Appears on the displayErasing Tracks in a Group-ERASE GR Repeatedly until Erase GR ? Appears on the displayIntroducing Track Editing Functions Dividing a Track-DIVIDE Loading slot Joining Two Tracks-JOINInsert an MD you want to edit into the MD Until Join ? appears on DisplayUntil Move ? appears on Display Position where you want To move the track toMoving a Track-MOVE Track you want to moveUntil ERASE? appears on Display Erasing Tracks-ERASEErasing All Tracks-ALL Erase Track you want to eraseAssigning Titles to an MD Title entry modeSelected title entry mode Press or To changePress Enter to finish the current Press Cancel to exit fromEnter characters Title entrySelect the character you Changing the TitleFollow steps 1 to 4 on Want to correct, by pressingUsing the Timers Using Recording TimerHow Recording Timer actually works Set the start time Set the shut-off timePress CLOCK/TIMER repeatedly Using Daily TimerHow Daily Timer actually works Until Daily Timer appearsTo adjust the volume level Adjust the volume levelVolume setting appears on Display To turn off the Daily Timer after its setting is doneUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance To clean the discStains on the unit English Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD limitations CD/MD Messages Cannot REC x1 REC onlyCannot REC x1 or x2 only Troubleshooting NON Audio or DVDSpecifications EN, CS Victor Company of JAPAN, Limited 0803AIMMDWJEM
Top Page Image Contents