Recording CD onto an MD and a Tape
—CD Synchronized Recording
With this recording method, you can start and stop CD play, MD and tape recordings at the same time.
English
To stop recording, press 7.
“WRITING” flashes on the display for a while.
To eject the MD or tape, press 7 to stop the recording, then press the corresponding eject button.
1 Load discs into the 5-CD changer.
•If the current playing source is not “CD,” press CD 6, then 7 before going to the next step.
•You can make a program (see page 17) or select Random Play (see page 18) if you want. = Go to step 3.
On the remote control ONLY:
2 Press DISC UP or DISC DOWN to select the disc you want to record, then 7 before going to the next step.
DISC UP
To record a single track during play or pause
On the remote control ONLY:
While playing back or pausing a track you | MD&TAPE |
want to record, press MD&TAPE REC. | REC |
|
The playback of the track is stopped, and the
same track starts playing from the beginning again. This time, the MD recorder and cassette deck start recording the track.
•After the track is recorded, both playback and recording stop automatically.
DISC DOWN
3 Insert a recordable MD into the MD loading
slot and put a recordable cassette into the cassette loading slot.
For the MD:
Set the MD recording length mode,
•Set the MD recording speed to “x1.”
For the cassette:
Press REV.MODE to select Reverse Mode as necessary.
4 Press MD&TAPE REC. | REC |
| MD&TAPE |
CD play and recording start. |
|
•When you select a track by pressing ¢ or 4 before pressing MD&TAPE REC, recording starts from the selected track (except when Program Play is selected).
The REC (MD recording) and REC (tape recording) indicators start flashing on the display.
MD and tape |
| Remaining | |
recording indicators | playing time | ||
C D | MD SP | TAPE |
|
1 2 3 4 5 | REC | REC |
|
| x 1 |
|
|
The track number | MD remaining |
on the disc currently | recording time |
being recorded |
|
When CD player stops, MD recorder and the cassette deck stop automatically.
To change the information shown on the display
On the remote control ONLY:
Press DISP/CHARA. | DISP/CHARA |
• Each time you press the button, the recording indications, the current track numbers of both the disc and the MD, and the clock indication appear in sequence on the display.
•When recording from a CD-R/RW
You cannot make a digital recording from a
•When recording on an MD and a tape at the same time A
36