JVC GVT0104-002A, CA-UXJ55MD, 0803AIMMDWJEM manual Specifications

Page 67

Specifications

English

CA-UXJ55MD

Amplifier

Output Power (IEC 268-3):


40 W (20 W + 20 W) at 4		Ω (MAX.)
30 W (15 W + 15 W) at 4		Ω (10 % THD)
Audio input sensitivity/Impedance (at 1 kHz)
Analog input:	400 mV/47 kΩ
AUX/DVD:
	(at “Input LEVEL 1”)
	200 mV/47 kΩ
	(at “Input LEVEL 2”)
Speakers/Impedence:	4 Ω – 16 Ω

Cassette deck

Frequency response:

Normal (type I): 60 Hz—14 000 Hz

Wow and flutter: 0.15 % (WRMS)

General

Power requirement: AC 230 V		, 50 Hz
Power consumption: At operation: 50 W
	On standby:	11.8 W
		0.9 W (in Power Save)
Dimensions (approx.):
175 mm x 239.5 mm x 378 mm (W/H/D)
Mass (approx.):	7.8 kg

Tuner

FM tuning range:	87.50 MHz—108.00 MHz
AM tuning range:	531 kHz—1 710 kHz (at 9 kHz
	channel spacing)
	530 kHz—1 710 kHz (at 10 kHz
	channel spacing)

CD player

CD Capacity:	5 CDs
Dynamic range:	87 dB
Signal-to-noise ratio:	90 dB
Wow and flutter:	Immeasurable

Supplied accessories

See page 6.

Design and specifications are subject to change without notice.

MD recorder

Audio playing system:	MiniDisc digital audio system
Recording system:	Magneto-optical overwrite
	system
Reading system:	Non-contact, semiconductor laser
	pickup (λ=780 nm)
Error correction system:	CIRC (Cross Interleave Reed-
	Solomon Code)
Recording/Playback time (when using a 80-minute MD)
	SP:	80 minutes
	LP2:	160 minutes
	LP4:	320 minutes
Sampling frequency:	44.1 kHz

Audio compression system: ATRAC (Adaptive TRansform Acoustic Coding)/ATRAC3

( )

64

Image 67

Contents CA-UXJ55MD Page Important for Laser Products Introduction PrecautionsAbout This Manual Contents Front Panel Location of the Buttons and ControlsFront panel Display window Display window on the front panelSee pages in parentheses for details Remote ControlFM antenna Connecting AntennasGetting Started UnpackingTo connect speakers Connecting SpeakersAM antenna To connect an outdoor AM antennaTo play the other equipment through this unit, connect Connecting External EquipmentPutting the Batteries into the Remote Control To connect external equipmentTo check the clock time with tones Setting the ClockBasic and Common Operations To change the clock againTo turn off the unit automatically Auto Standby To turn off the clock indication Power SaveOn the remote control Turning On/Off the Key-touch ToneReinforcing the Bass Sound Adjusting the Volume LevelBass or treble level Adjusting the TonePress BASS/TREBLE to adjust the Bass Changing the Display BrightnessPress and hold ¢or 4for more than 1 second Tuning in to a StationTo change the FM reception mode Listening to FM and AM BroadcastsTuning in to a Preset Station Presetting StationsLoading Discs When playing a CD-R or CD-RWPlaying Back Discs on the 5-CD Changer Playing Back All the Discs Continuous PlayTo locate a particular point in a track during play Basic Disc OperationsTo change a disc during playback of another disc To start playing a disc during playback of another discPrograming the Track Playing Order -Program Play To go to another track directly using the number buttonsTo change the information shown on the display To erase the entire program To check the program contentsPlaying at Random-Random Play To modify the programRepeat Play Prohibiting Disc Ejection-Disc LockTo stop play for a moment Playing Back MDsPlaying Back the Entire MD -Normal Play Basic MD OperationsWhen the MD recorder stops While playing or pausingPress ¢or 4repeatedly Repeat to program other tracks you want Load an MDUntil MD Program appears On the display Press the number buttons to select the tracksUntil MD Group appears on Display Playing Tracks in a Group-Group PlayUntil MD Random appears On the display Load an MD including groupsEnter the characters to search for the track Repeating Tracks-Repeat PlaySearching for Tracks to Play MD Title Search Press Title SearchTo enter a C or c, press Available symbols are as followsPress Enter To prohibit MD ejection-MD LockPress Tape 2 To play both sides-Reverse ModePlaying Back Tapes Playing Back a TapeListening to External Equipment Listening to External EquipmentTo avoid erasing important recordings Recording on MDsBefore You Start Recording on an MD About the track marksTo check the remaining recording time Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp About High-Speed RecordingTo set LP-prefix addition mode Setting MD Recording ModesTo set group recording mode To set the recording length modeRecording mode in is still Shown on the display Press CD REC Mode to select the CD RECRecording mode Press MD REC when the selectedPress MD REC Press CD REC Mode to selectTrack mark entry mode Prepare the source to record fromTo keep the best recording and playback sound quality Recording on TapesBefore You Start Recording on a Tape To protect your recordingsPress Tape REC when Reverse modeRecording CD onto a Tape CD-Tape Synchronized Recording Recording onto a TapePress Tape REC To record a single track of a CD/MD during playFor the cassette CD Synchronized RecordingPress MD&TAPE REC For the MDGuidance-MD Group Functions Using MD Groups as a separate itemHow to make up Groups Editing MDsIntroducing Group Editing Functions Forming a Group-FORM GR Track To cancel the setting, press CANCEL, then repeat fromYou can also select the track using Repeatedly until Entry GR ? Appears on the displayTo join the divided groups, see the Join GR function on Dividing a Group-DIVIDE GRRepeatedly until Divide GR? Appears on the display Track as the dividing PointJoining Two Groups-JOIN GR When Cannot Join appears on the display in stepRepeatedly until Join GR ? Appears on the display 4while holding Shift to select the group Moving a Group-MOVE GRRepeatedly until Move GR ? Appears on the display Press Group Skip ¢or Group SkipRepeatedly until Ungroup ? Appears on the display To cancel the setting, press CancelUngrouping Tracks-UNGROUP Dissolving All Groups-UNGR ALLRepeatedly until Erase GR ? Appears on the display Erasing Tracks in a Group-ERASE GRIntroducing Track Editing Functions Dividing a Track-DIVIDE Until Join ? appears on Display Joining Two Tracks-JOINInsert an MD you want to edit into the MD Loading slotTrack you want to move Position where you want To move the track toMoving a Track-MOVE Until Move ? appears on DisplayTrack you want to erase Erasing Tracks-ERASEErasing All Tracks-ALL Erase Until ERASE? appears on DisplayPress or To change Title entry modeSelected title entry mode Assigning Titles to an MDTitle entry Press Cancel to exit fromEnter characters Press Enter to finish the currentWant to correct, by pressing Changing the TitleFollow steps 1 to 4 on Select the character youUsing Recording Timer Using the TimersHow Recording Timer actually works Set the shut-off time Set the start timeUntil Daily Timer appears Using Daily TimerHow Daily Timer actually works Press CLOCK/TIMER repeatedlyTo turn off the Daily Timer after its setting is done Adjust the volume levelVolume setting appears on Display To adjust the volume levelTimer Priority Using Sleep TimerHow Sleep Timer actually works To clean the disc MaintenanceStains on the unit English Hcms High-speed Copy Management System Scms Serial Copy Management SystemMD limitations Cannot REC x1 REC only CD/MD MessagesCannot REC x1 or x2 only NON Audio or DVD TroubleshootingSpecifications EN, CS Victor Company of JAPAN, Limited 0803AIMMDWJEM