JVC CA-UXJ55MD manual Adjusting the Tone, Changing the Display Brightness, Bass or treble level

Page 15

Adjusting the Tone

You can adjust the bass level (low frequency range) and the treble level (high frequency range) within a range of “–5” to “+5” only while the unit is turned on.

•This function only affects the playback sound, and does not affect your recording.

•This function also affects the sound from headphones.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

1 Press BASS/TREBLE to adjust the BASS/

TREBLE

bass or treble level.

Current setting

Ex.: When you select “BASS.”

2 On the remote control:

Press VOLUME + to increase the level or press VOLUME – to decrease the level.

VOLUME

English

Changing the Display Brightness

You can change the display brightness only while the unit is turned on.

On the remote control ONLY:

Press DIMMER while the unit is turned on.	DIMMER

•Each time you press the button, the display brightness changes as follows:

DIMMER 1 DIMMER 2

DIMMER OFF

DIMMER 1: The display illumination dims.

DIMMER 2: The display illumination dims and the blue illumination on the display disappears.

DIMMER OFF: The display and blue illumination resumes.

Turning off (on standby) the unit sets the display brightness back to “DIMMER OFF.”

On the unit:

Turn VOLUME + / – control clockwise to increase the level or counterclockwise to decrease the level.

VOLUME

+

–

12

Image 15

Contents CA-UXJ55MD Page Important for Laser Products Precautions IntroductionAbout This Manual Contents Location of the Buttons and Controls Front PanelFront panel Display window Display window on the front panelSee pages in parentheses for details Remote ControlFM antenna Connecting AntennasGetting Started UnpackingTo connect speakers Connecting SpeakersAM antenna To connect an outdoor AM antennaTo play the other equipment through this unit, connect Connecting External EquipmentPutting the Batteries into the Remote Control To connect external equipmentTo check the clock time with tones Setting the ClockBasic and Common Operations To change the clock againTo turn off the unit automatically Auto Standby To turn off the clock indication Power SaveOn the remote control Turning On/Off the Key-touch ToneReinforcing the Bass Sound Adjusting the Volume LevelBass or treble level Adjusting the TonePress BASS/TREBLE to adjust the Bass Changing the Display BrightnessPress and hold ¢or 4for more than 1 second Tuning in to a StationTo change the FM reception mode Listening to FM and AM BroadcastsTuning in to a Preset Station Presetting StationsLoading Discs When playing a CD-R or CD-RWPlaying Back Discs on the 5-CD Changer Playing Back All the Discs Continuous PlayTo locate a particular point in a track during play Basic Disc OperationsTo change a disc during playback of another disc To start playing a disc during playback of another discTo go to another track directly using the number buttons Programing the Track Playing Order -Program PlayTo change the information shown on the display To erase the entire program To check the program contentsPlaying at Random-Random Play To modify the programRepeat Play Prohibiting Disc Ejection-Disc LockTo stop play for a moment Playing Back MDsPlaying Back the Entire MD -Normal Play Basic MD OperationsWhile playing or pausing When the MD recorder stopsPress ¢or 4repeatedly Repeat to program other tracks you want Load an MDUntil MD Program appears On the display Press the number buttons to select the tracksUntil MD Group appears on Display Playing Tracks in a Group-Group PlayUntil MD Random appears On the display Load an MD including groupsEnter the characters to search for the track Repeating Tracks-Repeat PlaySearching for Tracks to Play MD Title Search Press Title SearchTo enter a C or c, press Available symbols are as followsPress Enter To prohibit MD ejection-MD LockPress Tape 2 To play both sides-Reverse ModePlaying Back Tapes Playing Back a TapeListening to External Equipment Listening to External EquipmentTo avoid erasing important recordings Recording on MDsBefore You Start Recording on an MD About the track marksTo check the remaining recording time Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp About High-Speed RecordingTo set LP-prefix addition mode Setting MD Recording ModesTo set group recording mode To set the recording length modeRecording mode in is still Shown on the display Press CD REC Mode to select the CD RECRecording mode Press MD REC when the selectedPress MD REC Press CD REC Mode to selectTrack mark entry mode Prepare the source to record fromTo keep the best recording and playback sound quality Recording on TapesBefore You Start Recording on a Tape To protect your recordingsPress Tape REC when Reverse modeRecording CD onto a Tape CD-Tape Synchronized Recording Recording onto a TapePress Tape REC To record a single track of a CD/MD during playFor the cassette CD Synchronized RecordingPress MD&TAPE REC For the MDGuidance-MD Group Functions Using MD Groups as a separate itemHow to make up Groups Editing MDsIntroducing Group Editing Functions Forming a Group-FORM GR Track To cancel the setting, press CANCEL, then repeat fromYou can also select the track using Repeatedly until Entry GR ? Appears on the displayTo join the divided groups, see the Join GR function on Dividing a Group-DIVIDE GRRepeatedly until Divide GR? Appears on the display Track as the dividing PointWhen Cannot Join appears on the display in step Joining Two Groups-JOIN GRRepeatedly until Join GR ? Appears on the display 4while holding Shift to select the group Moving a Group-MOVE GRRepeatedly until Move GR ? Appears on the display Press Group Skip ¢or Group SkipRepeatedly until Ungroup ? Appears on the display To cancel the setting, press CancelUngrouping Tracks-UNGROUP Dissolving All Groups-UNGR ALLRepeatedly until Erase GR ? Appears on the display Erasing Tracks in a Group-ERASE GRIntroducing Track Editing Functions Dividing a Track-DIVIDE Until Join ? appears on Display Joining Two Tracks-JOINInsert an MD you want to edit into the MD Loading slotTrack you want to move Position where you want To move the track toMoving a Track-MOVE Until Move ? appears on DisplayTrack you want to erase Erasing Tracks-ERASEErasing All Tracks-ALL Erase Until ERASE? appears on DisplayPress or To change Title entry modeSelected title entry mode Assigning Titles to an MDTitle entry Press Cancel to exit fromEnter characters Press Enter to finish the currentWant to correct, by pressing Changing the TitleFollow steps 1 to 4 on Select the character youUsing the Timers Using Recording TimerHow Recording Timer actually works Set the shut-off time Set the start timeUntil Daily Timer appears Using Daily TimerHow Daily Timer actually works Press CLOCK/TIMER repeatedlyTo turn off the Daily Timer after its setting is done Adjust the volume levelVolume setting appears on Display To adjust the volume levelUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance To clean the discStains on the unit English Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD limitations CD/MD Messages Cannot REC x1 REC onlyCannot REC x1 or x2 only NON Audio or DVD TroubleshootingSpecifications EN, CS Victor Company of JAPAN, Limited 0803AIMMDWJEM