ASSEMBLY STEP 3
ALL
MODELS
HARDWARE BAG 3 CONTENTS :
WAVY WASHER (L) | BOLT (M) | SPRING WASHER (B) | FLAT WASHER (K) |
22.5 mm | 20 mm | 15 mm | 20 mm |
Qty: 2 | Qty: 2 | Qty: 2 | Qty: 2 |
CONSOLE MAST
CONSOLE CABLE 
MAIN FRAME
Note: Be careful not to pinch any wires while attaching the console mast.
CRANK
PEDAL ARM
GUIDE RAIL
PEDAL ARM WHEEL
WAVY WASHER (L)
FLAT WASHER (K)
SPRING WASHER (B)
BOLT (M)
AOpen hardware bag 3.
BCarefully pull the console cable through the console mast using the twist tie located inside the console mast.
CGently slide the console mast onto the main frame and attach console mast to main frame using
DSlide wavy washer (l) over crank followed by pedal arm as shown. Rest pedal arm wheel on guide rail.
EAttach the pedal arm to the crank using 1 flat washer (k), 1 spring washer (b) and 1 bolt (M).
FRepeat steps
12