ASSEMBLY STEP 5
HARDWARE BAG 5 CONTENTS :
ALL | FLAT WASHER (K) | SPRING WASHER (B) | BOLT (M) |
| |
20 mm | 15 mm | 20 mm | TEFLON | ||
MODELS | Qty: 2 | Qty: 4 | Qty: 2 | ||
WASHER (P) | |||||
|
|
|
| ||
|
|
|
| 28.4 mm | |
|
|
|
| Qty: 4 |
FLAT WASHER (E) | NUT (J) |
17 mm | Qty: 2 |
Qty: 2 | BOLT (O) |
| 70 mm |
| Qty: 2 |
LOWER HANDLEBAR |
NUT (J) |
FLAT WASHER (E) |
FLAT WASHER (K) |
SPRING WASHER (B) |
SPRING WASHER (B) |
BOLT (O) |
BOLT (M) |
PEDAL ARM BRACKET |
TEFLON WASHERS (P) |
LOWER LINK ARM |
14 |
AOpen hardware bag 5.
BSlide lower link arm onto pedal arm bracket.
CAttach lower link arm to pedal arm using 1 flat washer (k), 1 spring washer (b) and 1 bolt (M).
DAlign opposite end of lower link arm with bracket on bottom of lower handlebar.
EPlace teflon washers (P) on both sides of the lower link arm. While holding teflon washers (p) slide lower link arm into bottom end of lower handlebar.
FSecure the joint with 1 flat washer (e), 1 spring washer (b),1 bolt (o) and secure with 1 nut (J).
GRepeat steps