Precor TRM 800 warranty Upright support attachment, left side

Assembling the Treadmill		23
Component	Appearance	Lower connection
		point
Television cable	Round with black insulation
Console power	Dual leads with red and
cable	black insulation
Auto Stop sensor	Round with black insulation
cable
Power supply	Rectangular, black, 5" x
	2¹₄" x 1¹₄"

CAUTION: Be careful not to cut or pinch any wires during the following step.

3.Place the left-hand upright support into the base frame side bracket.

4.Secure the left-hand upright support to the side bracket using four socket head screws, four black washers, and two locknuts. Partially tighten the fasteners.

Figure 9: Upright support attachment, left side

5.Lower the treadmill fairing assembly over the upright supports and align it to them.

Important: In the following step, take care not to unseat any of the components in the stop switch.

6.Feed the upper end of the cable assembly through the fairing so that its upper end extends through the bottom opening in the center column and out the round opening in the console mounting plate.