Precor TRM 800 warranty Turning the Treadmill On and Off, Weight Limit, Location

Page 57

Treadmill Safety Features

55

If the restart switch trips during exercise, perform the following steps:

1.Reattach the safety clip if necessary.

2.Press the restart switch down until it clicks, returning it to its normal position.

Note: If the restart switch trips, all information about the current workout is deleted.

3.Start the workout from the beginning, reducing the time as needed to account for the amount of exercise that has been completed.

Figure 31: Attaching the safety clip

Turning the Treadmill On and Off

To turn the treadmill ON and OFF, use the power switch located beneath the hood, near the power cord receptacle.

Important: When the treadmill is not being used, turn it OFF.

Weight Limit

Do not use the treadmill if you weigh more than 500 pounds (225 kg). If you weigh more than 350 pounds (160 kg), do not run on the treadmill.

Location

The area around the treadmill must remain open, and free of interference from objects such as other equipment, at all times. In addition, for user safety and proper maintenance, an area three feet (one meter) wide by six feet (two meters) long must remain open and free of interference directly behind the running belt.

Image 57
Contents Assembling and Maintaining TRM 800-Series Treadmills Page Page Intellectual Property Notice Trademark NoteSafety Precautions Important Safety InstructionsAssembling and Maintaining TRM 800-Series Treadmills Safety Code Hazardous Materials and Proper Disposal Educating UsersRegulatory Notices for the Rfid Module Product Recycling and DisposalRadio Frequency Interference RFI Federal Communications Commission, PartIndustry Canada Regulatory Notices for Cardiovascular Exercise Equipment Safety Approvals for Cardiovascular EquipmentEuropean Applications Cardiovascular Type EquipmentUser’s authority to operate the equipment Electrical Recommendations 240 V Treadmills Treadmill Grounding InstructionsNorth American 120-volt, 20-amp power receptacle Obtaining Service Obtaining Updated DocumentationTable of Contents Commercial Cardiovascular Equipment Limited Warranty Assembling the Treadmill To prepare the treadmill for assemblyRequired Tools Installation RequirementsFasteners Hardware Kit not to scaleTo unpack the cables Unpacking the CablesRemoval and replacement of the rear fairing cover Assembling the Frame To begin assembly of the frameUpright support attachment, right side Point To thread cables through the frameUpright support attachment, left side Handrail and console assembly attachment Completing Assembly To complete assembly of the treadmill baseTo secure the fasteners To attach the power cord clips Attaching the Power Cord ClipsPower cord placement under front of treadmill Checking Treadmill Alignment and Adjusting the Running BeltTo level the treadmill Leveling the UnitBreaking in the Equipment Plugging In the Power CordAssembling and Maintaining TRM 800-Series Treadmills Threading the Cable Assembly P80 Installing the ConsoleRemoving the access cover from the P80 console To thread the cable assemblyConnecting Cables P80 To connect the television cable Connecting the Television CableConnecting the television cable Connecting the Ethernet and Base Unit Data CablesConnecting the Power Cable Connecting the Heart Rate Sensor CableTo complete the installation Completing the Console Installation P80Threading the Cable Assembly P30 and P20 Connecting Cables P30 Connecting Cables P20 Completing the Console Installation P30 and P20 To reassemble the fairing Reassembling the Treadmill FairingTo verify that the heart rate display is operational Verifying That the Heart Rate Display Is OperationalAssembling and Maintaining TRM 800-Series Treadmills Daily Cleaning MaintenanceDaily Inspection Monthly Maintenance Weekly MaintenanceTo adjust the running belt Adjusting the Running BeltTo align the running belt Checking the Alignment of the Running BeltStoring the Chest Strap Moving the EquipmentTo put the treadmill into an inclined position for moving Long-Term Storage Assembling and Maintaining TRM 800-Series Treadmills To enter the safety code and start the treadmill Entering the Safety CodeRestart switch Using the Treadmill Safety ClipWeight Limit Turning the Treadmill On and OffLocation Assembling and Maintaining TRM 800-Series Treadmills Warranty Periods and Coverage Limited WarrantyConditions and Restrictions Exclusive Remedies Complete this portion and keep for your records Exclusion of Consequential and Incidental DamagesPage Precor Incorporated