Chapter 4
Treadmill Safety Features
Before allowing users on Precor equipment, review the Important Safety Instructions in this manual. You should also teach your patrons how to use the equipment safely, according to the guidelines on.
Entering the Safety Code
When the equipment is shipped from the factory, safety code protection is not active.
After you have activated the safety code, you must inform your patrons that the equipment requests a safety code to prevent unauthorized use. They must complete the following steps to use the equipment.
To enter the safety code and start the treadmill:
1.Assume the starting position, with one hand free to enter the code and the other hand holding a handrail.
Important: Hold the handrail securely with at least one hand throughout the following steps.
2.When you see the banner text on the console, select a program or press GO.
3.When you are prompted to enter the safety code and unlock the treadmill, press the 1, 2, 3, and 4 keys in order.
If you have entered the code correctly, the workout begins. Otherwise, the equipment pauses for two seconds and then prompts you to enter the code again. Pressing five or more keys returns you to the initial safety code prompt.
Note: On a treadmill, a