26 | Assembling and Maintaining TRM |
Note: Using a hex wrench, reach through the openings in the outer sides of the hood to tighten the side screws.
Figure 11: Hood and fastener placement
Attaching the Power Cord Clips
This treadmill includes a set of clips that hold the power cord away from the incline lift movement and other potential sources of wear and damage. Use these clips to secure the power cord to the base frame beneath the hood.
Important: When attaching the power cord clips, keep users’ safety and the placement of the power cord in mind. If the power cord runs along the length of the treadmill, use the power cord clips to secure it to the side rail.
To attach the power cord clips:
1.Wrap the clip around the power cord near the power switch at the front of the treadmill and clamp it shut.