C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 16 Level the unit.
Rear crossbar
Rotate rear adjustment pads.
Base tube
Nut
Height adjustor
22.Level the unit. Diagram 16. To keep the unit stable, the EFX has adjustable rear pads and, at the front of the base assembly, a height adjustor. Check to make sure that the unit does not wobble from side to side or front to back.
Important: If the unit is placed on a slightly, uneven surface, adjusting the rear pads can help, but will not compensate for extremely uneven surfaces.
a.To remove any side to side movement or wobble, rotate the rear pads.
b.To counteract any rocking (front to back) motion, ask your assistant to grasp the upright support so that he or she can raise the front of the unit off the floor. Use a crescent or combination wrench to loosen the nut.
•Turn the height adjustor clockwise to raise the height of the front end.
•Turn the height adjustor counterclockwise to lower the height.
Once you have the proper height adjustment, use the wrench to turn the nut counterclockwise and tighten it securely against the base tube.
Diagram 17 Clean the ramp. |
Foot pedal |
Ramp |
Wipe ramp with a |
damp, clean cloth. |
Roller |
23.Clean the ramp. Diagram 17. Wipe down the ramp and foot pedals with a soft cloth dampened in a diluted solution of mild soap and water.
page 20