Precor EFX534 owner manual Determining the Units of Measure, Electrical power must be supplied

Page 24

C O M M E R C I A L P R O D U C T S D I V I S I O N

To access the Custom Settings Mode, the following must occur:

❑Electrical power must be supplied.

The foot pedal speed must be maintained at 40 strides per minute. Or, the optional battery recharger must be plugged into the EFX and connected to an appropriate power source.

Note: The optional battery recharger connection is highly recommended, if you plan to customize the EFX.

❑Check that the Precor banner appears on the display and, if necessary, maintain the minimum stride rate.

❑Press the appropriate key sequences.

To select the units of measure and set the maximum workout and pause times, press the following:

Note: The Resistance ▲ key in the following series is the key on the left as you face the display. If you press the Resistance ▼▲ keys on the right, you cannot access the

Custom Settings.

Reset, QuickStart, Enter, QuickStart, Resistance ▲, QuickStart, Enter, QuickStart

Important:To access Custom Settings Mode, press Reset while the Precor banner is displayed. Within 1/3 second, begin pressing the key sequences. If the system does not detect a key press (within 1/3 second after Reset), it returns to the banner. Once you begin entering a key sequence, each key must be pressed within four seconds of the other or the Precor banner reappears and you have to begin again.

The functions of the display console keys while in Custom Settings Mode are described in the box below.

Display key functions within the Custom Settings Mode

▼▲ lets you scroll through the various selections that appear.

Enter saves the information being displayed and moves to the next aspect of the program.

Reset exits Custom Settings Mode and displays the Precor banner.

Select displays the name of the data field that you are viewing. Or, toggles between the available selections.

Note: The ▼▲ keys can be gently pressed and held to view several selections. The longer the key is held down, the faster the numbers scroll past.

DETERMINING THE UNITS OF MEASURE

Two different units of measure can be selected, Metric or U.S. standard. Make your selection using the ▼▲ keys. Press Enter once the correct unit is displayed.

Note: Anytime you wish to exit the Custom Settings Mode, press the Reset key.Any previous display attributes that you selected by pressing Enter are saved and re- corded in memory. If no key press is detected within two minutes (when the optional battery recharger is attached), the system resets and the Precor banner reappears.

page 24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents M M E R C I a L P R O D U C T S D I V I S I O N Important Safety Instructions Safety Approval Hazardous Materials and Proper DisposalTable of Contents Back cover RFI Radio Frequency Interference European ApplicationsUser’s authority to operate the equipment European ApplicationsEFX SELF-POWERED Features Obtaining ServiceAbout this Manual Equipment and prevent injuries to yourselfUnpacking the EFX Standard EquipmentOther Equipment Acquiring the Appropriate ToolsHardware KIT Setting Up the EFX Installation RequirementsAssembly Instructions Diagram 5 Front base assembly M M E R C I a L O D U C T S V I S I O N Upright Diagram 9 Place the base on supportive blocks Bolts G and washers H Frame stabilizer Upright Tighten all mounting screws using a 9/16 wrench. Diagram Diagram 12 TightenDiagram 13 Secure Diagram 15 Secure Diagram 16 Level the unit Diagram 18 Insert the front end cap Removing the Locking PINSupplying Power to the EFX534 Testing the Heart Rate DisplayCustom Settings Mode Changing the Custom SettingsElectrical power must be supplied Display key functions within the Custom Settings ModeDetermining the Units of Measure Setting a Workout Time Limit Setting a Pause Time LimitReset, Enter, QuickStart Using Csafe Standard Equipment Enter ResetUser ID Entry Program Keys Features on the Display Console EFX534 DisplayCenter Display User Setup Prompts Setup Prompts DescriptionSelect QuickStartUsing Quickstarttm During the Setup Prompts Weight promptPress Quickstart at Following occurs Precor bannerCenter Display Low Battery Smartrate DisplayInformational Displays Prior to Shutdown Keys on the Display Console DefaultValues Prompts DefaultValueHeart Rate Feature Utilizing the Smartrate FeatureWeight Loss Zone Exercising on the EFXWorkout Tips Using the Handlebars Using the Stationary HandrailChanging the Display Features Using the Select KEY Quick Steps to Working OUT PAUSE, Cool Down and Exit Features Cooling Down After a WorkoutA course This is what happens Press Reset Displays the Workout Summary banner Cool down ModeInserting the Locking PIN Pause Mode, youManual Mode and the Quickstarttm KEY CoursesHill Climb Course Interval CourseYour AGE To use the interval course, take the following stepsWeight Loss Course Cross Training CourseMaintenance Cleaning the EquipmentInspection Symptoms of a LOW Battery Using the Battery RechargerStoring the Polar Chest Strap Servicing the EFX and Long Term StorageReplacing the Battery Battery Recharger Power CordExploded Views Exploded Views Exploded Views Exploded Views Exploded Views Exploded Views Exploded Views Thank You and Welcome to Precor Date of Purchase Product Serial NumbersPlease indicate the type and number of products purchased How many members do you have?Limited Warranty Warranty Periods and CoverageConditions and Restrictions Complete this portion and keep for your recordsProduct Specifications Electronic Specifications
Top Page Image Contents