C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 24 EFX Locking pin.
Insert the locking pin when you are finished working out or when you leave the EFX for an extended length of time.
Storage location
REMOVING THE LOCKING PIN
The locking pin secures the roller arm and keeps it from traveling up or down the ramp. Pull firmly on the pin to slide it out of the ramp. A lanyard is attached to the locking pin and ramp.
Store the locking pin underneath the ramp once it is removed from the roller arm. See inset in Diagram 24.
Note: The following text is written in second person so that you, as owner or manager, can copy the sections (excluding Maintenance) for your customers.
WORKOUT TIPS
The steps to working out on the EFX are listed on the next page. A short description appears in the left margin with the more thorough explanation following on the right. Tips to consider during your workout are shown below:
•If the optional battery recharger is not connected, you need to maintain a stride rate above 40 strides per minute before keypad entries can occur. If you have questions, talk to the manager.
•Remove the locking pin. Refer to page 35.
•Answer the Setup prompts by pressing the ▼ or ▲ keys.
•Press Enter to select the information being displayed.
•The workout time prompt lets you choose between and 1 to 240 minutes. If the custom settings allow it, you can also select an indefinite workout time by pressing the ▲ key, until the word INFINITE appears on the display.
•During a workout, the Select keys determine which workout statistics appear on the display.
page 35