ProForm PFTL49909.0 user manual Console Tie Wire Bracket Large Hole

Page 10

7.Set the console assembly face down on a soft surface to avoid scratching the console assem- bly. Hold the Right Handrail (33), which has a large hole in one side, near the console assem- bly.

Next, insert the console wire and the tie into the large hole in the side of the Right Handrail (33). Using needlenose pliers, pull the console wire out of the hole near the bracket on the Right Handrail.

Then, set the Right Handrail (33) on the console assembly. Make sure that no wires are pinched. Start an M5 x 16mm Screw (85) with an M5 Star Washer (7) into the Right Handrail, and then start two M4.2 x 19mm Screws (10) into the Right Handrail. Tighten the M5 x 16mm

Screw and then tighten the two M4.2 x 19mm Screws; do not overtighten the Screws.

Attach the Left Handrail (not shown) to the console assembly in the same way. Note: There are no wires on the left side.

8.Remove the plastic ties from the Right Handrail (33) and the Left Handrail (not shown). If necessary, press the Cage Nuts (105) back into place. With the help of a second person, hold the console assem- bly near the Right Upright (54).

Connect the Wire Harness (39) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CON-

NECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Next, insert the connectors and the excess wire downward into the Right Upright (54). Then, remove the wire tie from the Wire Harness.

7

Console

 

 

Tie Wire

85

 

Bracket

7

10

33

Large

 

 

 

Console

Hole

 

 

Assembly

 

 

8

 

 

33

Console

 

Assembly

Console

105

Console

39

Wire

Wire

 

54

Wire

39

Tie

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. PFTL49909.0 Serial No On the WEBTable of Contents Important Precautions Treadmill, and before performing the main Before YOU Begin Assembly Make sure that the power cord is unplugged Bolt Head Wire Tie Star Washer 9 do not fully tighten the Patch Bolt yet See the left inset drawing. Identify the twoOuter side of the Frame Spacer facing Right Upright See the left inset drawing in . IdentifyConsole Tie Wire Bracket Large Hole Then, firmly tighten all six Bolts M10 x 60mm Patch Bolts. Raise Side is shown. Be careful not to overtightenTop View Attach the Right Crosswalk Arm not shown HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleInsert the key into the console HOW to Turn on the PowerHOW to USE the Manual Mode Start the walking beltSeconds- avoid moving your hands Measure your heart rate if desiredTurn on the fan if desired HOW to USE a Preset Workout Information Mode HOW to USE the Crosswalk ArmsHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingCompatible with GFCI-equipped outlets Problem The walking belt slows when walked on Walking belt. If the walking belt has shifted toProblem The crosswalk arms squeak during use Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. PFTL49909.0 Key No. Qty DescriptionQty Exploded Drawing A-Model No. PFTL49909.0 R0909A Exploded Drawing B-Model No. PFTL49909.0 R0909A Exploded Drawing C-Model No. PFTL49909.0 R0909A Exploded Drawing D-Model No. PFTL49909.0 R0909A Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT

PFTL49909.0 specifications

The ProForm PFTL49909.0 Treadmill is a state-of-the-art exercise machine designed for both novice and experienced fitness enthusiasts. It boasts a range of features and technologies that cater to various workout needs, delivering an exceptional cardiovascular experience right in the comfort of your home.

One of the standout features of the ProForm PFTL49909.0 is its powerful 2.5 continuous horsepower motor, which guarantees a smooth and consistent performance during any workout session. This motor allows users to achieve speeds of up to 10 mph, catering to everything from a brisk walk to an intense running session. The adjustable incline feature, with a range up to 10%, enables users to simulate uphill running, intensifying their workouts and helping to target different muscle groups.

The running surface of this treadmill is another highlight. It features a spacious 18" x 50" belt, providing ample room for users to run comfortably. The cushioned deck is designed to reduce impact on joints, making it suitable for individuals who may be recovering from an injury or those who want to minimize the risk of injury during their workouts.

Equipped with a user-friendly console, the ProForm PFTL49909.0 includes an LCD display that showcases essential workout metrics such as time, distance, speed, calories burned, and heart rate. To further enhance the workout experience, this treadmill is compatible with iFit technology. Users can access personalized workout programs, virtual coaching, and interactive training sessions, promoting both motivation and variety in their fitness routines.

Another significant characteristic of this treadmill is its foldable design, which is a boon for those with limited workout space. The SpaceSaver design allows for easy storage after use, making it ideal for home gyms or smaller living spaces.

Additionally, the integrated Bluetooth speakers allow users to connect their devices and listen to music or follow along with guided workouts, creating a more immersive exercise experience.

In summary, the ProForm PFTL49909.0 Treadmill combines functionality, convenience, and cutting-edge technology to offer a comprehensive fitness solution. With powerful performance, an array of features, and user-centric design, it stands out as an excellent investment for anyone looking to enhance their home workout routine.
Top Page Image Contents