1.Make sure that the power cord is unplugged.
Position the Base (52) and the Base Extensions (45)
Attach six Base Feet (63) to the Base (52) and the Base Extensions (45) with six #8 x 1" Tek Screws (26).
2.Have a second person hold the Base (52) in the position shown.
Identify the Right Upright (54), which has a square hole near the lower end.
Hold the Right Upright (54) so the two round holes are on top as shown. Attach the Right Upright to the Base (52) with two M10 x 75mm Bolts (2) and two M10 Star Washers (9). Do not fully tighten the Bolts yet.
Attach the Left Upright (53) to the Base (52) in the same way.
1 | 52 |
| 26 |
| |
26 |
|
| |||
|
| 63 | 26 | ||
63 | 45 |
|
|
| |
26 | 45 |
| 26 | 63 | |
63 |
|
| |||
63 |
| 63 |
| ||
26 |
|
|
|
|
|
2 |
|
|
|
|
|
|
| Round Holes |
| ||
Round Holes |
|
|
| 54 |
|
| Square | 2 | |||
|
| ||||
53 |
|
| Hole | 52 | 9 |
| 9 | 2 |
| ||
|
|
|
|
| |
7