ProForm PFTL49909.0 user manual Problem The walking belt slows when walked on

Page 23

Locate the Reed Switch (89) and the Magnet (62) on

 

 

 

the left side of the Pulley (71). Turn the Pulley until the

 

1/8 in.

 

Magnet is aligned with the Reed Switch. Make sure

 

71

that the gap between the Magnet and the Reed

 

 

Switch is about 1/8 in. (3 mm). If necessary, loosen

 

89

62

the M4.2 x 13mm Tek Screw (3), move the Reed

 

Switch slightly, and then retighten the Screw.

Top View

 

Reattach the Motor Hood (not shown), and run the

 

treadmill for a few minutes to check for a correct

 

 

 

speed reading.

 

 

 

PROBLEM: The walking belt slows when walked on

 

 

 

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 14.

b. If the walking belt is overtightened, treadmill perfor-

b

2–3 in.

 

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and UNPLUG THE

 

 

 

POWER CORD. Using the hex key, turn both idler

 

 

 

roller bolts counterclockwise, 1/4 of a turn. When the

 

 

 

walking belt is properly tightened, you should be able

 

 

 

to lift each edge of the walking belt 2 to 3 in. (5 to 7

 

 

 

cm) off the walking platform. Be careful to keep the

 

Idler Roller

 

walking belt centered. Then, plug in the power cord,

 

 

insert the key, and run the treadmill for a few minutes.

 

Bolts

 

Repeat until the walking belt is properly tightened.

 

 

 

c.If the walking belt still slows when walked on, please see the front cover of this manual.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt has shifted to the left, first re-

 

 

 

 

a

 

move the key and UNPLUG THE POWER CORD.

 

 

Using the hex key, turn the left idler roller bolt clock-

 

 

 

wise 1/2 of a turn. Be careful not to overtighten the

 

 

 

walking belt. If the walking belt has shifted to the

 

 

 

right, turn the left idler roller bolt counterclockwise 1/2

 

 

 

of a turn. Then, plug in the power cord, insert the key,

 

 

 

and run the treadmill for a few minutes. Repeat until

 

 

 

the walking belt is centered.

 

 

 

b. If the walking belt slips when walked on, first re-

b

move the key and UNPLUG THE POWER CORD.

Using the hex key, turn both idler roller bolts clock-

 

wise, 1/4 of a turn. When the walking belt is correctly

 

tightened, you should be able to lift each edge of the

 

walking belt 2 to 3 in. (5 to 7 cm) off the walking plat-

 

form. Be careful to keep the walking belt centered.

 

Then, plug in the power cord, insert the key, and care-

 

fully walk on the treadmill for a few minutes. Repeat

 

until the walking belt is properly tightened.

 

PROBLEM: The incline of the treadmill does not change correctly

 

SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re-

move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the

maximum incline level and then return to the minimum level. This will recalibrate the incline system.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents On the WEB QUESTIONS?Model No. PFTL49909.0 Serial No Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MTTable of Contents Important Precautions Treadmill, and before performing the main Before YOU Begin Assembly Make sure that the power cord is unplugged Bolt Head Wire Tie See the left inset drawing in . Identify See the left inset drawing. Identify the twoOuter side of the Frame Spacer facing Right Upright Star Washer 9 do not fully tighten the Patch Bolt yetConsole Tie Wire Bracket Large Hole Then, firmly tighten all six Bolts Top View Side is shown. Be careful not to overtightenM10 x 60mm Patch Bolts. Raise Attach the Right Crosswalk Arm not shown PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramStart the walking belt HOW to Turn on the PowerHOW to USE the Manual Mode Insert the key into the consoleTurn on the fan if desired Measure your heart rate if desiredSeconds- avoid moving your hands HOW to USE a Preset Workout HOW to USE the Crosswalk Arms Information ModeHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Compatible with GFCI-equipped outlets TroubleshootingProblem The power turns off during use Walking belt. If the walking belt has shifted to Problem The walking belt slows when walked onProblem The crosswalk arms squeak during use Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. PFTL49909.0Qty Exploded Drawing A-Model No. PFTL49909.0 R0909A Exploded Drawing B-Model No. PFTL49909.0 R0909A Exploded Drawing C-Model No. PFTL49909.0 R0909A Exploded Drawing D-Model No. PFTL49909.0 R0909A Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty

PFTL49909.0 specifications

The ProForm PFTL49909.0 Treadmill is a state-of-the-art exercise machine designed for both novice and experienced fitness enthusiasts. It boasts a range of features and technologies that cater to various workout needs, delivering an exceptional cardiovascular experience right in the comfort of your home.

One of the standout features of the ProForm PFTL49909.0 is its powerful 2.5 continuous horsepower motor, which guarantees a smooth and consistent performance during any workout session. This motor allows users to achieve speeds of up to 10 mph, catering to everything from a brisk walk to an intense running session. The adjustable incline feature, with a range up to 10%, enables users to simulate uphill running, intensifying their workouts and helping to target different muscle groups.

The running surface of this treadmill is another highlight. It features a spacious 18" x 50" belt, providing ample room for users to run comfortably. The cushioned deck is designed to reduce impact on joints, making it suitable for individuals who may be recovering from an injury or those who want to minimize the risk of injury during their workouts.

Equipped with a user-friendly console, the ProForm PFTL49909.0 includes an LCD display that showcases essential workout metrics such as time, distance, speed, calories burned, and heart rate. To further enhance the workout experience, this treadmill is compatible with iFit technology. Users can access personalized workout programs, virtual coaching, and interactive training sessions, promoting both motivation and variety in their fitness routines.

Another significant characteristic of this treadmill is its foldable design, which is a boon for those with limited workout space. The SpaceSaver design allows for easy storage after use, making it ideal for home gyms or smaller living spaces.

Additionally, the integrated Bluetooth speakers allow users to connect their devices and listen to music or follow along with guided workouts, creating a more immersive exercise experience.

In summary, the ProForm PFTL49909.0 Treadmill combines functionality, convenience, and cutting-edge technology to offer a comprehensive fitness solution. With powerful performance, an array of features, and user-centric design, it stands out as an excellent investment for anyone looking to enhance their home workout routine.
Top Page Image Contents