ProForm PFTL97007.0 user manual See steps 4 and 6. Tighten the 3/8 x 4 1/2, Bolts

Page 10

10. Attach the console assembly with six 5/16" x 1

10

 

1/4" Bolts (7) and six 5/16" Star Washers (10)

 

 

 

(only one side is shown).

Console

 

 

 

See steps 4 and 6. Tighten the 3/8" x 4 1/2"

Assembly

 

 

 

Bolts (6).

 

 

 

 

10

 

 

7

 

 

10

 

10

 

 

7

 

11. Identify the Storage Latch (53). Remove the tie

11

 

from the end of the tube. Make sure that the

 

 

 

sleeve has been slid over the indicated hole and

 

 

that the Latch Knob (54) is locked into the hole.

 

 

Pull on the sleeve to make sure that it is

 

54

locked into place.

 

 

 

 

Tube

Hole

 

 

 

Sleeve

 

 

53

12. Raise the Frame (56) to the position shown.

12

 

Have a second person hold the Frame until

 

 

 

this step is completed.

56

 

Orient the Storage Latch (53) so that the large

 

 

barrel and the Latch Knob (54) are in the posi-

8

4

tions shown.

 

 

Attach the Latch Bracket (14) and Storage Latch

 

53

(53) to the Base (83) with two 3/8" x 2" Bolts (4)

 

 

and two 3/8" Nuts (8).

54

Large

 

 

Attach the upper end of the Storage Latch (53)

 

Barrel

 

 

to the bracket on the Frame (56) with a 3/8" x 2"

 

 

Bolt (4) and a 3/8" Nut (8). Note: It may be nec-

 

14

essary to move the Frame back and forth to

 

 

83

align the Storage Latch with the bracket.

 

 

Lower the Frame (56) (see HOW TO LOWER

8

4

THE TREADMILL FOR USE on page 25).

 

 

10

 

Image 10
Contents Call TOLL-FREE QUESTIONS?Please do not Contact On the WEBTable of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged Do not fully fold the Frame yet Be careful not to pinch the Upright WireGers do not fully tighten the Bolts yet Tighten the Nut the Wheel must turn freelyPower is Turned on Not Connected PROPERLY, the CON Sole MAY be Damaged WhenSee steps 4 and 6. Tighten the 3/8 x 4 1/2 BoltsSmall Screws HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleSelect the user mode HOW to Turn on the PowerHOW to Personalize Console Settings Insert the key into the consoleHOW to Identify Yourself AS User 1 or User Select a default user settingSet the date and time Select the manual mode HOW to USE the Manual ModePersonalize console settings if desired Start the walking belt and adjust the speedMeasure your heart rate if desired Select a preset classic workout HOW to USE a Classic WorkoutPress the Start button to start the workout HOW to USE AN Event Training Workout Select an event training workoutHOW to Create a Custom Workout Select one of the four custom workoutsHOW to USE a Custom Workout HOW to View the Fitness Journal Exit the user mode HOW to Reset the Fitness JournalSelect the user mode. See on Reset the fitness journal Information ModeHOW to Adjust the Cushioning System HOW to USE the Stereo Sound SystemOptional Chest Pulse Sensor HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR0108A Key No. Qty DescriptionQty Exploded Drawing A-Model No. PFTL97007.0 R0108A Exploded Drawing B-Model No. PFTL97007.0 R0108A Exploded Drawing C-Model No. PFTL97007.0 Exploded Drawing D-Model No. PFTL97007.0 R0108A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT