ProForm PFTL97007.0 user manual Assembly

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver

,

adjustable wrench

, and needlenose pliers

.

 

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem- bly. Extra hardware may be included.

 

3/8" Star

5/16" Star

1/4" Star

3/8" Nut (8)–3

Washer (33)–2

Washer (9)–4

Washer (10)–6

 

Base Pad Spacer

 

 

 

(13)–2

 

 

 

#8 x 3/4" Screw (1)–4

#8 x 1" Tek Screw (2)–4

1/4" x 1 1/4" Bolt (5)–2

3/8" x 2" Bolt (4)–3

5/16" x 1 1/4" Bolt (7)–6

3/8" x 4 1/2" Bolt (6)–4

6

Image 6
Contents Call TOLL-FREE QUESTIONS?Please do not Contact On the WEBTable of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged Do not fully fold the Frame yet Be careful not to pinch the Upright WireGers do not fully tighten the Bolts yet Tighten the Nut the Wheel must turn freelyPower is Turned on Not Connected PROPERLY, the CON Sole MAY be Damaged WhenSee steps 4 and 6. Tighten the 3/8 x 4 1/2 BoltsSmall Screws Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleSelect the user mode HOW to Turn on the PowerHOW to Personalize Console Settings Insert the key into the consoleSelect a default user setting HOW to Identify Yourself AS User 1 or UserSet the date and time Select the manual mode HOW to USE the Manual ModePersonalize console settings if desired Start the walking belt and adjust the speedMeasure your heart rate if desired HOW to USE a Classic Workout Select a preset classic workoutPress the Start button to start the workout HOW to USE AN Event Training Workout Select an event training workoutHOW to Create a Custom Workout Select one of the four custom workoutsHOW to USE a Custom Workout HOW to View the Fitness Journal Exit the user mode HOW to Reset the Fitness JournalSelect the user mode. See on Reset the fitness journal Information ModeHOW to USE the Stereo Sound System HOW to Adjust the Cushioning SystemOptional Chest Pulse Sensor HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR0108A Key No. Qty DescriptionQty Exploded Drawing A-Model No. PFTL97007.0 R0108A Exploded Drawing B-Model No. PFTL97007.0 R0108A Exploded Drawing C-Model No. PFTL97007.0 Exploded Drawing D-Model No. PFTL97007.0 R0108A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT