HOW to USE the Manual Mode

1.Insert the key into the console.

See HOW TO TURN ON THE POWER on page 14.

2.Personalize console settings if desired.

See HOW TO PERSONALIZE CONSOLE SET- TINGS on page 14.

3.Select the manual mode.

Each time you insert the key, the manual mode will be selected. If the welcome screen is turned on, the welcome screen will appear. If you have se- lected a workout, press any of the workout buttons repeatedly until only zeros appear in the display.

4.Start the walking belt and adjust the speed.

To start the walking belt, press the Start button, the Speed increase button, or one of the Precision Quick Speed buttons numbered 1 to 12. Note: After you press the buttons, it may take a moment for the walking belt to reach the selected speed.

If you press the Start button or the Speed increase button, the walking belt will begin to move at 1 mph. As you exercise, change the speed of the walking belt as desired by pressing the Speed in- crease and decrease buttons. Each time you press a button, the speed setting will change by 0.1 mph; if you hold down a button, the speed setting will change in increments of 0.5 mph. If you press one of the twelve numbered Precision Quick Speed buttons, the walking belt will gradually increase in speed until it reaches the selected speed setting.

To stop the walking belt, press the Stop button. To restart the walking belt, press the Start button, the Speed increase button, or one of the Precision Quick Speed buttons.

5.Change the incline of the treadmill as desired.

To change the incline of the treadmill, press the Incline increase or decrease buttons, or one of the Quick Incline buttons numbered 0 to 12. Each time you press a button, the incline will gradually adjust until it reaches the selected incline setting.

6.Select a display mode and follow your progress with the display.

The console offers three display options. The dis- play option you select will determine which workout information is shown. Press the Display button re- peatedly to select the desired display option.

As you walk or run on the treadmill, the display can show the following workout information:

•The elapsed time.

•The distance that you have walked or run.

•The speed of the walking belt.

•The approximate number of calories you have burned.

•The date.

•A track representing 1/4 mile (400 meters).

•The incline level of the treadmill.

•Your heart rate. Note: Your heart rate can be dis- played only while you use the handgrip pulse sensor or the optional chest pulse sensor.

•The display can also show an animation of a runner. As you increase or decrease the speed of the walking belt, the runner will speed up or slow down.

Note: Regardless of which display mode you select, the speed or incline setting will appear in the dis- play for a few seconds each time you change the setting. In addition, your heart rate will appear in the display each time you use the handgrip pulse sen- sor or the optional chest pulse sensor (see step 7).